| 精密滚珠丝杠副的弹流润滑分析 |
| |
| 引用本文： | 张佐营,李志,崔增柱,宋现春.精密滚珠丝杠副的弹流润滑分析[J].机械设计与研究,2010,26(1):69. |
| |
| 作者姓名： | 张佐营 李志 崔增柱 宋现春 |
| |
| 作者单位： | 徐州工程学院机电学院;山东建筑大学机电学院; |
| |
| 基金项目： | 国家自然科学基金资助项目(50675124);;徐州工程学院培育项目(XKY2008317) |
| |
| 摘 要： | 从Hamrock-Dowson公式和滚珠丝杠副的接触参数出发,推导了滚珠丝杠副中最小油膜厚度的计算公式,利用数值计算方法,分析了丝杠转速、润滑油粘度和接触载荷等使用参数以及接触角、螺旋升角和曲率比等设计参数对最小油膜厚度的影响。对滚珠丝杠副的润滑状态进行了判别,计算分析表明,滚珠丝杠副的润滑属于边界润滑。讨论了改善滚珠丝杠副润滑状态的途径,分析认为,设计专用润滑脂润滑单元和提高滚道表面加工质量是改善润滑状态、提高滚珠丝杠副高速性能的主要途径。
|
| 关 键 词： | 滚珠丝杠副 弹流润滑 油膜厚度 润滑状态 |
Analysis of Elastohydrodynamic Lubrication of Ball Screw Mechanism |
| |
| ZHANG Zuo-ying,LI Zhi,CUI Zeng-zhu,SONG Xian-chun.Analysis of Elastohydrodynamic Lubrication of Ball Screw Mechanism[J].Machine Design and Research,2010,26(1):69. |
| |
| Authors: | ZHANG Zuo-ying LI Zhi CUI Zeng-zhu SONG Xian-chun |
| |
| Affiliation: | 1.Mechatronics school of Xuzhou Institute of Technology/a>;Xuzhou/a>;Jiangsu221008/a>;China/a>;2.Mechatronics school of Shandong Jianzhu University/a>;Ji'nan/a>;Shandong250100/a>;China |
| |
| Abstract: | The formula of the thinnest lubricating oil film thickness in ball screw is induced according to the Hamrock-Dowson expression and the contact parameters of ball screw.Based on work mentioned above,the influence of the working parameters such as the rotating speed of screw shaft,the viscosiity of lubricating oil and the contact force,and the structural parameters such as contact angle,helix angle and the curvature ratio on the thinnest lubricant oil film thickness is analyzed by numerical simulation.Through... |
| |
| Keywords: | ball screw mechanism elastohydrodynamics lubrication film thickness lubrication state |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机械设计与研究》浏览原始摘要信息 |
|
点击此处可从《机械设计与研究》下载全文 |
|
