首页 | 本学科首页   官方微博 | 高级检索  
     

基于SINDA/FLUINT的低温回路热管整机仿真分析
引用本文:刘成志,杨帆,董德平,陆燕. 基于SINDA/FLUINT的低温回路热管整机仿真分析[J]. 低温工程, 2012, 4(4): 50-53. DOI: 10.3969/j.issn.1000-6516.2012.04.010
作者姓名:刘成志  杨帆  董德平  陆燕
作者单位:1.中国科学院上海技术物理研究所 上海200083;2.中国科学院上海技术物理研究所 上海200083;3.中国科学院上海技术物理研究所 上海200083;4.中国科学院上海技术物理研究所 上海200083
摘    要:基于热流分析软件SINDA/FLUINT,对低温回路热管进行了仿真模型分析,得到了它的工作温度、漏热、压降等随热负载的变化关系.将计算结果与实验进行对比,在一定的热负载范围内,仿真结果与实验结果吻合,验证了仿真模型的正确性.通过分析模型的计算结果,可为以后低温回路热管的设计和实验提供参考.

关 键 词:SINDA  FLUINT  低温回路热管  仿真模型

Simulation analysis of cryogenic loop heat pipe based on SINDA/FLUINT
Liu Chengzhi , Yang Fan , Dong Deping , Lu Yan. Simulation analysis of cryogenic loop heat pipe based on SINDA/FLUINT[J]. Cryogenics, 2012, 4(4): 50-53. DOI: 10.3969/j.issn.1000-6516.2012.04.010
Authors:Liu Chengzhi    Yang Fan    Dong Deping    Lu Yan
Affiliation:Liu Chengzhi Yang Fan Dong Deping Lu Yan(Shanghai Institute of Technical Physics,Chinese Academy of Sciences,Shanghai 200083,China)
Abstract:Based on the thermohydraulic analysis software SINDA/FLUINT,a cryogenic loop heat pipe simulation model was built with which the effects of heat load on working temperature,heat leak,pressure reduction were calculated.After comparing the simulation and experimental results,a good agreement was shown within certain range of heat loads,which implied the correctness of the model.Therefore,the simulation results could serve for future design and experiment of the cryogenic loop heat pipe.
Keywords:SINDA  FLUINT  cryogenic loop heat pipe  simulation model
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号