首页 | 本学科首页   官方微博 | 高级检索  
     

型钢与混凝土间的粘结强度分析
引用本文:马付彪,赵鸿铁,薛建阳.型钢与混凝土间的粘结强度分析[J].西安建筑科技大学学报(自然科学版),2007,39(1):83-86.
作者姓名:马付彪  赵鸿铁  薛建阳
作者单位:西安建筑科技大学土木工程学院,陕西,西安,710055
基金项目:国家自然科学基金;陕西省自然科学基金
摘    要:根据板的弹塑性稳定等理论,推导出型钢的混凝土临界保护层厚度.同时,在大量型钢混凝土组合结构粘结性能试验数据的基础上,考虑混凝土强度、型钢表面状况、混凝土保护层厚度、型钢配钢率、相对锚固长度五个主要影响因素,用安全系数反映其它因素影响,回归得到粘结强度计算公式,分析确定了安全系数等参数的具体值.与已有试验结果和国外规范作了比较,证明了公式的可靠性.公式可为型钢混凝土粘结性能的试验研究及理论分析提供参考和依据.

关 键 词:粘结应力  型钢混凝土  临界保护层厚度
文章编号:1006-7930(2007)01-0083-04
修稿时间:2003-11-24

Analysis on the bond strength between steel shape and concrete in SRC structures
MA Fu-biao,ZHAO Hong-tie,XUE Jian-yang.Analysis on the bond strength between steel shape and concrete in SRC structures[J].Journal of Xi'an University of Architecture & Technology,2007,39(1):83-86.
Authors:MA Fu-biao  ZHAO Hong-tie  XUE Jian-yang
Abstract:By applying the board elastic-plastic theory,the critical thickness of concrete cover is derived.Meanwhile,based on data from many previous steel reinforced concrete(SRC)experiments,a calculation formula of maximum average bond stress is established.Several factors which affect the bond stress are discussed,such as concrete strength,relative interface length,thickness of concrete cover.Meanwhile,the value of the safe factor is defined by analysis.Comparing the estimates with the past test results,the formula warrants safety and serviceability.All these may contribute to the further analysis in SRC structures.
Keywords:bond stress  steel reinforced concrete  critical thickness of concrete cover
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号