| 基于变分隐式曲面的三角网格孔洞修补 |
| |
| 引用本文： | 王乾 程筱胜 戴宁 袁天然 刘大峰. 基于变分隐式曲面的三角网格孔洞修补[J]. 中国制造业信息化, 2006, 35(12): 75-78,81 |
| |
| 作者姓名： | 王乾 程筱胜 戴宁 袁天然 刘大峰 |
| |
| 作者单位： | 南京航空航天大学江苏省数字化设计制造工程技术研究中心,江苏南京210016 |
| |
| 基金项目： | 国家高技术研究发展计划（863计划）资助项目（2005AA420240）;江苏省科技攻关项目（BE2005014）;南京市医学科技发展计划项目（ZKX0420）;南京市科技发展计划项目（200504022） |
| |
| 摘 要： | 针对三角网格模型存在的孔洞问题提出一种基于变分隐式曲面的孔洞修补算法。首先，利用孔洞边界信息构造插值孔洞边界的变分隐式曲面并将其网格化，得到初始孔洞网格，再利用边界点裁剪初始孔洞网格，最后把裁剪后的孔洞网格与初始网格拓扑合并，完成孔洞修补。算法充分考虑了孔洞周围的信息，使得孔洞网格与原始网格光滑连接，取得了比较好的效果。
|
| 关 键 词： | 孔洞修补 变分隐式曲面 三角网格 逆向工程 |
| 文章编号： | 1672-1616（2006）23-0075-04 |
| 收稿时间： | 2006-10-18 |
| 修稿时间： | 2006-10-18 |
The Hole Repairing in Triangular Meshes Based on Variational Implicit Surfaces |
| |
| WANG Qian, CHENG Xiao - Sheng, DAI Ning, YUAN Tian - Ran, LIU Da - Feng. The Hole Repairing in Triangular Meshes Based on Variational Implicit Surfaces[J]. Manufacture Information Engineering of China, 2006, 35(12): 75-78,81 |
| |
| Authors: | WANG Qian CHENG Xiao - Sheng DAI Ning YUAN Tian - Ran LIU Da - Feng |
| |
| Abstract: | In this paper, a hole repairing algorithm based on variational interpolating implicit surfaces is proposed. The main process includes to construct a variational implicit surface by interpolating mesh boundary and polygonize, to cut out unwanted portions of implicit mesh with the help of boundary points, to merge the cutting mesh and original mesh for finishing hole repairing. Since the peripheral character of hole is taking into account during the hole repairing, the consistency between the hole and the original surface can be guaranteed and good results can be obtained. |
| |
| Keywords: | Hole Repairing Variational Implicit Surface Triangular Mesh Reverse Engineering |
| 本文献已被 维普 等数据库收录！ |
