| 高强钢复杂曲面件充液拉深工艺模拟研究 |
| |
| 引用本文： | 陈龙,张超,曹婷婷,李萍.高强钢复杂曲面件充液拉深工艺模拟研究[J].金属成形工艺,2012(3):39-42. |
| |
| 作者姓名： | 陈龙 张超 曹婷婷 李萍 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院,合肥230009 |
| |
| 摘 要： | 对某高强钢复杂曲面件的充液拉深工艺进行有限元数值模拟,分析了液室加载路径以及最高液室压力对成形结果的影响,得到该零件充液拉深成形合理的液室加载路径及最高液室压力。
|
| 关 键 词： | 高强钢 充液拉深 液室加载路径 最高液室压力 |
Simulation Research of Sheet Hydroforming Process for High Strength Steel Complex Surface Part |
| |
| CHEN Long,ZHANG Chao,CAO Ting-ting,LI Ping.Simulation Research of Sheet Hydroforming Process for High Strength Steel Complex Surface Part[J].Metal Forming Technology,2012(3):39-42. |
| |
| Authors: | CHEN Long ZHANG Chao CAO Ting-ting LI Ping |
| |
| Affiliation: | (School of Material Science and Engineering,Hefei University of Technology,Hefei 230009,China) |
| |
| Abstract: | The sheet hydroforming process of high strength steel complex surface part is investigated by numerical simulation.Influence of hydraulic pressure loading path and the maximum hydraulic pressure on the forming results is analyzed.Reasonable hydraulic pressure loading path and the maximum hydraulic pressure of hydroforming process are got for this part. |
| |
| Keywords: | high strength steel sheet hydroforming hydraulic pressure loading path maximum hydraulic pressure |
| 本文献已被 维普 等数据库收录！ |
