| 基于高压扭转法制备SiCp/Al基复合材料 |
| |
| 引用本文： | 王成国,林俐菁,刘红丽,王莉,薛克敏,袁宝国.基于高压扭转法制备SiCp/Al基复合材料[J].精密成形工程,2012,4(6):82-84. |
| |
| 作者姓名： | 王成国 林俐菁 刘红丽 王莉 薛克敏 袁宝国 |
| |
| 作者单位： | 合肥工业大学材料科学与工程学院,合肥230009 |
| |
| 基金项目： | 高等学校博士学科点专项基金资助项目（20100111110003）;合肥工业大学大学生创新性实验计划项目（2011CXCY071） |
| |
| 摘 要： | 基于高压扭转法制备SiCp/Al基复合材料(SiC体积分数为8.75%),采用排水法、金相显微镜、数字式显微硬度计,研究SiCp/Al基复合材料致密度、显微组织分布和硬度等性能。结果表明,基于高压扭转法可制备致密度高的SiCp/Al基复合材料,随着扭转半径的增加,SiC颗粒团聚现象减小,颗粒分布越均匀。材料的显微硬度呈先增加后减小的趋势。
|
| 关 键 词： | 高压扭转法 SiC/Al复合材料 组织 显微硬度 |
| 收稿时间： | 2012/9/10 0:00:00 |
| 修稿时间： | 2012/11/10 0:00:00 |
SiCp/Al Composites Fabricated by High-pressure Torsion |
| |
| WANG Cheng-guo,LIN Li-jing,LIU Hong-li,WANG Li,XUE Ke-min and YUAN Bao-guo.SiCp/Al Composites Fabricated by High-pressure Torsion[J].Journal of Netshape Forming Engineering,2012,4(6):82-84. |
| |
| Authors: | WANG Cheng-guo LIN Li-jing LIU Hong-li WANG Li XUE Ke-min and YUAN Bao-guo |
| |
| Affiliation: | (School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China) |
| |
| Abstract: | SiCp/AI composites were fabricated by high-pressure torsion. The density, microstructure and hardness of the composites were studied by means of Archimedes method, microscope and digital micro hardness tester. The results show that the high density of the SiCp/A1 matrix composites can be fabricated by high-pressure torsion. With the increase of the radius, clusters of SiC particles decrease, the distribution of SiC particles is homogeneous, the hardness increases then decreases. |
| |
| Keywords: | high-pressure torsion SiCp/A1 composites microstructure micro hardness |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
