| U形槽板多工步折弯方法及回弹预测 |
| |
| 引用本文： | 李世明,彭成允,陈敬,关婧.U形槽板多工步折弯方法及回弹预测[J].金属成形工艺,2012(3):34-38. |
| |
| 作者姓名： | 李世明 彭成允 陈敬 关婧 |
| |
| 作者单位： | [1]重庆理工大学材料科学与工程学院,重庆400054 [2]重庆理工大学汽车零部件制造及检测技术教育部重点实验室,重庆400054 [3]大江工业集团专用车分公司,重庆401321 |
| |
| 摘 要： | 分析对比了大型U形槽板的2种折弯成形方式,取U形槽板的小件进行多工步折弯回弹的有限元模拟并进行了相应的物理实验,得出了回弹角度预测值,提出在多工步折弯回弹有限元模拟中要注意的问题,为大型U形槽板的折弯成形生产提供了参考。
|
| 关 键 词： | U形槽板 多工步折弯方法 有限元模拟 回弹预测 |
Bending Method and Springback Prediction in Multi-step Bending for U-shaped Trough Plates |
| |
| LI Shi-ming,PENG Cheng-yun,CHEN Jing,GUAN Jing.Bending Method and Springback Prediction in Multi-step Bending for U-shaped Trough Plates[J].Metal Forming Technology,2012(3):34-38. |
| |
| Authors: | LI Shi-ming PENG Cheng-yun CHEN Jing GUAN Jing |
| |
| Affiliation: | 1.School of Material Science and Engineering,Chongqing University of Technology,Chongqing 400054,China;2.Key Laboratory of Manufacture and Test Techniques for Automobile Parts,Ministry of Education,Chongqing University of Technology,Chongqing 400054,China;3.Chongqing Dajiang Industrial Co.,Ltd.,Special Purpose Vehicle Branch Company,Chongqing 401321,China) |
| |
| Abstract: | Two bending styles of huge U-shaped trough plates were analysed.After the FEM simulation of multi-step bending springback was did and corresponding experiments were conducted through the small U-shaped trough plates,the predictive value of springback angle was obtained and some issues that should be payed attention to were put forward in the FEM simulation of multi-step bending springback,which provides references for huge U-shaped trough plates production |
| |
| Keywords: | U-shaped trough plates method of multi-step bending FEM simulation springback prediction |
| 本文献已被 维普 等数据库收录！ |
|
