| 组合式半轴法兰摆辗模具设计 |
| |
| 引用本文： | 陈文韬,杨栋,王欣芳,陈国强,陈文琳.组合式半轴法兰摆辗模具设计[J].精密成形工程,2012,4(6):68-70. |
| |
| 作者姓名： | 陈文韬 杨栋 王欣芳 陈国强 陈文琳 |
| |
| 作者单位： | [1]安徽省合肥汽车锻件有限责任公司,合肥230011 [2]合肥工业大学材料科学与工程学院,合肥230009 |
| |
| 摘 要： | 就半轴法兰摆辗模具中存在的问题,对原摆辗模具进行了改进设计,并对模具材料进行了改进,使模具适合在冲击载荷很大的环境下使用。对改进的模具结构和模具材料进行了实际生产验证,表明改进后的模具凸模更换方便,易于操作,在模具需要返修或者报废时,减少模具更换模块,模具返修次数减少,而且易于加工,降低了模具成本。
|
| 关 键 词： | 半轴法兰 摆辗 组合式凸模 模具设计 |
| 收稿时间： | 2012/9/10 0:00:00 |
| 修稿时间： | 2012/11/10 0:00:00 |
Mold Design for Rotary-forging of Combined Semiaxle Flange |
| |
| CHEN Wen-tao,YANG Dong,WANG Xin-fang,CHEN Guo-qiang and CHEN Wen-lin.Mold Design for Rotary-forging of Combined Semiaxle Flange[J].Journal of Netshape Forming Engineering,2012,4(6):68-70. |
| |
| Authors: | CHEN Wen-tao YANG Dong WANG Xin-fang CHEN Guo-qiang and CHEN Wen-lin |
| |
| Affiliation: | 1. Hefei Automotive Forgings Limited Liability Company, Hefei 230011, China;2. School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009 , China) |
| |
| Abstract: | The design of rotary-forging mold is improved for the existing problems in the mold of semiaxle flange. Struc ture of the original rotary-forging mold and the mold material are improved for use in the environment with large impact load. Improved mold structure and mold materials are tested in production. It shows that the mold after improvement is easy to re place punch, easy to operate, the moid repair frequency is reduced and the process is easy, the cost of the mold is reduced. |
| |
| Keywords: | semiaxle flange rotary-forging combined punch mold design |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
