Pathways for CO2 Formation and Conversion During Fischer–Tropsch Synthesis on Iron-Based Catalysts

CO₂ reaction and formation pathways during Fischer–Tropsch synthesis (FTS) on a co-precipitated Fe–Zn catalyst promoted with Cu and K were studied using a kinetic analysis of reversible reactions and with the addition of ¹³C-labeled and unlabeled CO₂ to synthesis gas. Primary pathways for the removal of adsorbed oxygen formed in CO dissociation steps include reactions with adsorbed hydrogen to form H₂O and with adsorbed CO to form CO₂. The H₂O selectivity for these pathways is much higher than that predicted from WGS reaction equilibrium; therefore readsorption of H₂O followed by its subsequent reaction with CO-derived intermediates leads to the net formation of CO₂ with increasing reactor residence time. The forward rate of CO₂ formation increases with increasing residence time as H₂O concentration increases, but the net CO₂ formation rate decreases because of the gradual approach to WGS reaction equilibrium. CO₂ addition to synthesis gas does not influence CO₂ forward rates, but increases the rate of their reverse steps in the manner predicted by kinetic analyses of reversible reactions using non-equilibrium thermodynamic treatments. Thus the addition of CO₂ could lead to the minimization of CO₂ formation during FTS and to the preferential removal of oxygen as H₂O. This, in turn, leads to lower average H_2/CO ratios throughout the catalyst bed and to higher olefin content and C₅₊ selectivity among reaction products. The addition of ¹³CO₂ to H₂/¹²CO reactants did not lead to significant isotopic enrichment in hydrocarbon products, indicating that CO₂ is much less reactive than CO in chain initiation and growth. We find no evidence of competitive reactions of CO₂ to form hydrocarbons during reactions of H₂/CO/CO₂ mixtures, except via gas phase and adsorbed CO intermediates, which become kinetically indistinguishable from CO₂ as the chemical interconversion of CO and CO₂ becomes rapid at WGS reaction equilibrium.