Mapping piezoelectric-field distribution in gallium nitride with scanning second-harmonic generation microscopy

Taking advantage of the electric field-enhanced second-harmonic generation effect in bulk gallium nitride (GaN) and indium gallium nitride (InGaN) quantum wells, we demonstrated the piezoelectric field distribution mapping in bulk GaN and InGaN multiple-quantum-well (MQW) samples using scanning second-harmonic generation (SHG) microscopy. Scanning SHG microscopy and the accompanying third-harmonic generation (THG) microscopy of the bulk GaN sample were demonstrated using a femtosecond Cr:forsterite laser at a wavelength of 1230 nm. Taking advantage of the off-resonant electric field-enhanced SHG effect and the bandtail state-resonance THG effect, the second- and third-harmonic generation microscopic images obtained revealed the piezoelectric field and bandtail state distributions in a GaN sample. Combined with 720 nm wavelength excited two-photon fluorescence microscopy in the same sample, the increased defect density around the defect area was found to suppress bandedge photoluminescence, to increase yellow luminescence, to increase bandtail state density, and to decrease residue piezoelectric field intensity. Scanning SHG microscopy of the InGaN MQW sample was resonant excited with 800 nm femtosecond pulses from a Ti:sapphire laser in order to suppress SHG contribution from the bulk GaN substrate. Taking advantage of the strong piezoelectric field inside the InGaN quantum well, the wavelength resonant effect, and the electric field-enhanced SHG effect of InGaN quantum wells, resonant scanning SHG microscopy revealed the piezoelectric field distribution inside the wells. Combined with accompanying three-photon fluorescence microscopy from the bulk GaN substrate underneath the quantum wells, the direct correspondence between the piezoelectric field strength inside the quantum well and the substrate quality can be obtained. According to our study, the GaN substrate area with bright bandedge luminescence corresponds to the area with strong SHG signals indicating a higher stained-induced piezoelectric field. These scanning harmonic generation microscopies exhibit superior images of the piezoelectric field and defect state distributions in GaN and InGaN MQWs not available before. Combining with scanning multiphoton fluorescence microscopy, these techniques open new ways for the physical property study of this important material system and can provide interesting details that are not readily available by other microscopic techniques.