| 基于虚拟样机技术的单级往复式空压机的设计和仿真研究 |
| |
| 引用本文： | 周建强,汪建平,张庆功,吴健.基于虚拟样机技术的单级往复式空压机的设计和仿真研究[J].机械制造,2006,44(12):25-27. |
| |
| 作者姓名： | 周建强 汪建平 张庆功 吴健 |
| |
| 作者单位： | 浙江工业大学浙西分校机电控制工程系,衢州,324000 |
| |
| 基金项目： | 浙江省衢州市科技局资助项目 |
| |
| 摘 要： | 阐述了空压机虚拟样机设计的框架结构、工作流程及其三维模型构建方法，进行了设计与运动学仿真方法研宄。该方法大大缩短了产品开发周期，提高了产品设计质量，降低了设计费用。
|
| 关 键 词： | 虚拟样机 空压机 仿真 |
| 文章编号： | 1000-4998（2006）12-0025-03 |
| 收稿时间： | 2006-08 |
| 修稿时间： | 2006-08 |
Research on Design and Simulation of Single Stage Reciprocating Air Compressor Based on Virtual Prototype Technology |
| |
| Zhou Jianqiang.Research on Design and Simulation of Single Stage Reciprocating Air Compressor Based on Virtual Prototype Technology[J].Machinery,2006,44(12):25-27. |
| |
| Authors: | Zhou Jianqiang |
| |
| Affiliation: | Zhou Jianqiang |
| |
| Abstract: | The frame structure, work flow and 3 - dimensional model building method of the virtual prototype design of the air compressor are presented in detail. The research on design and kinematics simulation method is carried out, resulting in greatly shortened product development cycle, improved design quality and reduced design cost. |
| |
| Keywords: | CAXA ADAMS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
