首页 | 本学科首页   官方微博 | 高级检索  
     

有机硅改性聚氨酯胶粘剂的研究
引用本文:张斌,孙海龙,矫彩山,张密林. 有机硅改性聚氨酯胶粘剂的研究[J]. 中国胶粘剂, 2006, 15(4): 17-20
作者姓名:张斌  孙海龙  矫彩山  张密林
作者单位:1. 哈尔滨工程大学化工学院,黑龙江省,哈尔滨市,150001;黑龙江省石油化学研究院,黑龙江省,哈尔滨市,150040
2. 哈尔滨工程大学化工学院,黑龙江省,哈尔滨市,150001
摘    要:在无溶剂条件下利用烷氧基硅烷合成了有机硅低聚物,用聚酯多元醇对其进行了改性。采用红外光谱对低聚物和预聚体进行了表征。在此基础上研究了不同合成路线所构体系的粘接性能、力学性能,同时用TG对其耐热性进行了考察,结果表明路线一的耐热性较好,在680℃下失重为66.1%。

关 键 词:有机硅  聚氨酯  改性
文章编号:1004-2849(2006)04-0017-04
收稿时间:2005-10-25
修稿时间:2005-10-25

Study on silicone-modified polyurethane adhesive
ZHANG Bin,SUN Hai-long,JIAO Cai-shan,ZHANG Mi-lin. Study on silicone-modified polyurethane adhesive[J]. China Adhesives, 2006, 15(4): 17-20
Authors:ZHANG Bin  SUN Hai-long  JIAO Cai-shan  ZHANG Mi-lin
Affiliation:1. School of Chemical Engineering,Harbin Engineering University,Harbin 150001,China;2. Petrochmistry Institute of Heilongjiang Harbin 150040,China
Abstract:In the cases of non-solvent, oligomers of silicone were prepared by polycondensation of alkoxyl silicone and modified by polyester polyhydric alcohol.FT-IR was employed to characterize the structure of oligomers and prepolymer. Furthermore, the mechanical properties, adhesion properties of the products of different preparation routine were tested respectively. And the heat resistance was also characterized by TG. Finally,it was found that the products of the first method,which had the loss of weight 66.1% compared with original polymer at the temperature of 680℃,had the best heat resistance.
Keywords:silicone  polyurethane  modified  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号