首页 | 本学科首页   官方微博 | 高级检索  
     

基于Pro/E的分件供送螺杆的造型设计
引用本文:张磊,徐昌贵,仉毅.基于Pro/E的分件供送螺杆的造型设计[J].包装工程,2007,28(5):70-72.
作者姓名:张磊  徐昌贵  仉毅
作者单位:北京工商大学,北京,100037;北京理工大学,北京,100081;北京工商大学,北京,100037;北京理工大学,北京,100081
摘    要:分件供送螺杆装置是灌装机中的关键零部件,介绍了应用Pro/E三维设计软件进行变距组合式螺杆的造型设计方法.设计过程中按推导出的数学方程构造各段螺旋线,并以该螺旋线作为扫描轨迹,遵循范成法原理包络出螺杆的各段螺旋曲面.该方法可以广泛应用于其它运动规律变螺距螺旋线螺杆的造型设计.

关 键 词:包装机械  分件供送螺杆  扫描  Pro/E
文章编号:1001-3563(2007)05-0070-03
修稿时间:2007-02-11

Modeling the Variable pitch screw on Pro/E
ZHANG Lei,XU Chang-gui,ZHANG Yi.Modeling the Variable pitch screw on Pro/E[J].Packaging Engineering,2007,28(5):70-72.
Authors:ZHANG Lei  XU Chang-gui  ZHANG Yi
Affiliation:1. Beijing Technology and Business University, Beijing 100037, China; 2. Beijing Institute of Technology, Beijing 100081, China
Abstract:Variable pitch screw is a critical part of the filling machine. The modeling method of variable pitch screw using Pro/Engineer software was introduced. The varying pitch helixes were constructed on the parameter equation, and were selected as sweep trajectory ; the surface of the screw was enveloped on the generating method. The method can be used on modeling other variable pitch screw.
Keywords:Pro/E
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号