| 低频扭转振动攻丝系统的研制 |
| |
| 引用本文： | 陈思羽,龙泽明,殷宝麟. 低频扭转振动攻丝系统的研制[J]. 机械工程师, 2009, 0(6): 77-78 |
| |
| 作者姓名： | 陈思羽 龙泽明 殷宝麟 |
| |
| 作者单位： | 佳木斯大学机械工程学院,黑龙江佳木斯,154007 |
| |
| 摘 要： | 基于单片机控制步进电机驱动主轴沿圆周方向振动的方式，研制了低频扭转振动攻丝系统，对软、硬件进行了综合测试，还设计了不同放大倍数、不同滤波频率的滤波放大电路。试验结果表明，振动攻丝中丝锥刀齿对切削区的脉冲力作用效果减小了攻丝扭矩。
|
| 关 键 词： | 振动攻丝机 控制系统 扭矩测量系统 攻丝扭矩 |
Development of Vibration Tapping System Beaded on Simple-chip Control Stepping Motor |
| |
| CHEN Si-yu,LONG Ze-ming,YIN Bao-lin. Development of Vibration Tapping System Beaded on Simple-chip Control Stepping Motor[J]. Mechanical Engineer, 2009, 0(6): 77-78 |
| |
| Authors: | CHEN Si-yu LONG Ze-ming YIN Bao-lin |
| |
| Affiliation: | (College of Mechanical Engineering, Jiamusi University, Jiamusi 154007, China) |
| |
| Abstract: | The low-frequency torsional vibration tapping system is developed successfully by a stepping motor under the control of a microcomputer. Hardware and software of the control system are integrally. With the amplifier-filter circuit, the torque dynamometer is used to monitor tapping torque. The experimental results show that, the impulsive force in vibration tapping leads to a much lower tapping torque. |
| |
| Keywords: | vibration tapping machine control system torque dynamometer system tapping torque |
| 本文献已被 维普 万方数据 等数据库收录！ |
