| 机械加工陶瓷表面研究的复型方法 |
| |
| 引用本文： | 张存信,杨继先.机械加工陶瓷表面研究的复型方法[J].理化检验(物理分册),1999,35(2):73-75. |
| |
| 作者姓名： | 张存信 杨继先 |
| |
| 作者单位： | 五二研究所 包头市014034 |
| |
| 摘 要： | 采用“一次复型”方法,用光学金相显微镜、扫描电子显微镜观察了经机加工后的陶瓷材料表面的形貌。试验结果表明,一次复型方法是研究陶瓷加工表面缺陷和微裂纹的一种简便、衫的检测方法,并可广泛用于大型工件及难于取样的硬脆材料内外表面微观检测。
|
| 关 键 词： | 陶瓷 加工表面 复型 机械加工 |
STUDY ON CERAMIC MACHINED SURFACE BY REPLICA TECHNIQUE |
| |
| Zhang Cunxin,Yang Jixian,Wang XiaoyanNo.,Research Institute.STUDY ON CERAMIC MACHINED SURFACE BY REPLICA TECHNIQUE[J].Physical Testing and Chemical Analysis Part A:Physical Testing,1999,35(2):73-75. |
| |
| Authors: | Zhang Cunxin Yang Jixian Wang XiaoyanNo Research Institute |
| |
| Affiliation: | Zhang Cunxin Yang Jixian Wang XiaoyanNo. 52 Research Institute |
| |
| Abstract: | Once replica" technique was used to observe microstructure of ceramic surface after machnining by Optical Microscope and SEM. Defects and microcracks were detected successfully. It can also be used for mi-cro-inspection of large components and inner and outer surfaces of hard and brittle materials. |
| |
| Keywords: | Ceramic Machined surface Replica |
| 本文献已被 CNKI 维普 等数据库收录！ |
