Experimental study of rotary magnetic field-assisted dry EDM with ultrasonic vibration of workpiece

Dry electrical discharge machining (EDM) is a green machining method which replaces the gas instead of liquid as dielectric medium. Due to the environmentally friendly nature of this method, recently, researchers focused on characterization of this process. In this work, effects of rotary magnetic field and also ultrasonic vibration of workpiece were studied on dry EDM process performance. Conducted experiments were divided in two main stages. At first stage, preliminary experiments were carried out to determine the best tool design in material and geometry points of view by considering the material removal rate (MRR). Also, effect of magnetic field was studied in the first stage. Results of the first stage of experiments indicated that the brass tool with two eccentric holes has the highest MRR rather than the other existing tool. In the second stage of experiments, parametric study on dry EDM process were implemented by using a brass tool with two eccentric holes and by applying rotary magnetic field for all experiments of the second stage. Influences of parameters such as pulse current, pulse on-time, pulse off-time, tool rotational speed, air injection inlet pressure, and especially power of ultrasonic table were studied on MRR, surface roughness (SR), electrode wear rate (EWR), and overcut (OC). Results showed that magnetic field has positive effects on MRR and SR. Also, by application of ultrasonic vibration achieving to superior MRR is feasible. At the end of the work, mathematical models were developed to correlate a relationship between process inputs and main outputs.