| 基于虚拟样机技术的数控旋压机仿真分析 |
| |
| 引用本文： | 沈军,潘红良.基于虚拟样机技术的数控旋压机仿真分析[J].现代制造工程,2004(8):55-57. |
| |
| 作者姓名： | 沈军 潘红良 |
| |
| 作者单位： | 上海华东理工大学452信箱(上海梅陇路130号),200237 |
| |
| 摘 要： | 采用虚拟样机技术开发机床的设计思路,结合CAD技术和仿真技术对数控旋压机的关键部件进行运动学分析; 并根据分析结果对设计方案进行优化,取得了良好的效果。
|
| 关 键 词： | 数控旋压机 虚拟样机 仿真分析 ADMAS |
| 文章编号： | 1671-3133(2004)08-0055-03 |
| 修稿时间： | 2003年12月19 |
Simulation analysis of NC spinning machine on virtual prototype technology |
| |
| Shen Jun,Pan Hongliang.Simulation analysis of NC spinning machine on virtual prototype technology[J].Modern Manufacturing Engineering,2004(8):55-57. |
| |
| Authors: | Shen Jun Pan Hongliang |
| |
| Abstract: | Aiming at design way of virtual prototyping technology, combined with CAD technology and simulation technology, dynamics analysis is carried for some key components of the device. According to the results of analysis, the optimizing design for the prototype is carried out and favorable effect is acquired. |
| |
| Keywords: | NC spinning machine Virtual prototype technology Simulation analysis ADMAS |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
