| 螺杆压缩机转子型线设计方法 |
| |
| 引用本文： | 徐健,余宾宴,余小玲,冯全科. 螺杆压缩机转子型线设计方法[J]. 压缩机技术, 2012, 0(2): 1-6,14 |
| |
| 作者姓名： | 徐健 余宾宴 余小玲 冯全科 |
| |
| 作者单位： | 西安交通大学能源与动力工程学院,陕西西安,710049 |
| |
| 摘 要： | 采用齿廓法线法,逐步演示螺杆压缩机转子型线的设计过程,并对复盛型线进行详细推导,验证了齿廓法线法在螺杆转子型线设计中的可靠便捷,从而得到了优于以往解析包络法的型线设计方法。
|
| 关 键 词： | 螺杆转子 型线设计 齿廓法线法 |
Study on Rotor Profile Design of Screw Compressors |
| |
| XU Jian , YU Bin-yan , YU Xiao-ling , FENG Quan-ke. Study on Rotor Profile Design of Screw Compressors[J]. Compressor Technology, 2012, 0(2): 1-6,14 |
| |
| Authors: | XU Jian YU Bin-yan YU Xiao-ling FENG Quan-ke |
| |
| Affiliation: | (School of Energy and Power Engineering,Xi’an Jiaotong University,Xi’an 710049,China) |
| |
| Abstract: | In this paper,the tooth profile normal line method is used to demonstrate the design process of rotor profile of screw compressors step-by-step and to derive the Fusheng Profile in detail.It proves the reliable and convenient of tooth profile normal line method in the design of screw rotor profile.Then the profile design method superior to the traditional envelope analysis method is obtained. |
| |
| Keywords: | screw rotor profile design tooth profile normal line method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
