首页 | 本学科首页   官方微博 | 高级检索  
     

基于GSM网络数据业务和短信业务的远动系统
引用本文:王红红,龚文杰,蒋世燕. 基于GSM网络数据业务和短信业务的远动系统[J]. 电力系统通信, 2007, 28(5): 58-62
作者姓名:王红红  龚文杰  蒋世燕
作者单位:1. 青岛大学,自动化工程学院,山东,青岛,266071
2. 青岛供电公司,山东,青岛,266002
3. 临沂电业局,山东,临沂,276000
摘    要:提出并设计了一个基于GSM网络的远动系统。该系统借助移动通信系统短信业务和数据业务,实现监控中心和终端设备之间的通信。该系统通过MCU采集数据,经GSM通信模块上传中心系统;中心系统运筹全局,下发遥控遥调等命令,以排除故障或优化系统运行。该方案因引用移动通信技术,使得系统具有覆盖面广、可靠性高、实时性强和运行费用低等特点。文章介绍了系统的工作原理、硬件结构和软件流程。

关 键 词:GSM网络  数据业务  短信业务  远动系统
文章编号:1005-7641(2007)05-0058-05
修稿时间:2006-08-15

Telecontrol system based on data and short message service of GSM network
WANG Hong-hong,GONG Wen-jie,JIANG Shi-yan. Telecontrol system based on data and short message service of GSM network[J]. Telecommunications for Electric Power System, 2007, 28(5): 58-62
Authors:WANG Hong-hong  GONG Wen-jie  JIANG Shi-yan
Affiliation:1. Automatic Engineering Department, Qingdao University, Qingdao 266071 ,China; 2. Qingdao Power Supply Company,Qingdao 266002 ,China; 3. Lingyi Power Supply Company, Linyi 276000, China
Abstract:This paper introduces a telecontrol system based on GSM network that realizes the communication between SCADA station and remote terminal units via data service and Short Message Service(SMS) of GSM.This system collects data through MCU,packets the data into GSM block and then uploads the packets to SCADA station.At the same time,the SCADA station can also send commands to the remote terminal units through GSM network in order to eliminate the faults and optimize the system operation.By using GSM technology,the system has the advantages of broader coverage,higher reliability and lower operation cost.The paper also introduces the working principle,hardware and software of the system.
Keywords:GSM network  data service  short message service  telecontrol system
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号