| 高效放电加工法及工艺参数优化实验研究 |
| |
| 引用本文： | 郭常宁,裴景玉,马春翔. 高效放电加工法及工艺参数优化实验研究[J]. 兵工学报, 2005, 26(2): 285-288 |
| |
| 作者姓名： | 郭常宁 裴景玉 马春翔 |
| |
| 作者单位： | 上海交通大学,机械学院制造技术与自动化装备研究所,上海,200030;上海交通大学,机械学院制造技术与自动化装备研究所,上海,200030;上海交通大学,机械学院制造技术与自动化装备研究所,上海,200030 |
| |
| 摘 要： | 根据放电时产生的加工液沸腾、气化膨胀引起放电通道周围加工液快速流动的原理，提出了一种新的排屑方法，系统地研究了使用该方法的放电加工特性。试验结果表明，该方法可以实现高效率放电加工。当放电电流大、极间距离小、脉冲长、脉冲间隔短时，加工屑能够顺利地被排出极间。
|
| 关 键 词： | 机械制造工艺与设备 高效率EDM 加工屑排出方法 加工液沸腾 气化爆炸 |
| 文章编号： | 1000-1093(2005)02-0285-04 |
Experiment Investigation on High Efficiency EDM and Optimization of Processing Parameter |
| |
| GUO Chang-ning,PEI Jin-yu,MA Chun-xiang. Experiment Investigation on High Efficiency EDM and Optimization of Processing Parameter[J]. Acta Armamentarii, 2005, 26(2): 285-288 |
| |
| Authors: | GUO Chang-ning PEI Jin-yu MA Chun-xiang |
| |
| Affiliation: | ShangHai JiaoTong University, Shanghai 200030, China |
| |
| Abstract: | A new excluding method of debris using the rapid flow due to evaporation of dielectric fluid when discharging was proposed and the EDM characteristics of the method were experimentally discussed. The result shows that the higher efficiency EDM is attained by this method and the debris is smoothly removed with the conditions of large discharge current, narrow gap and the short pulse interval time. |
| |
| Keywords: | technology and equipment for machine building high efficiency EDM excluding method of debris evaporation of dielectric fluid gasification exploding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《兵工学报》浏览原始摘要信息 |
|
点击此处可从《兵工学报》下载全文 |
