首页 | 本学科首页   官方微博 | 高级检索  
     

P204萃取分离溶液中的锌与钴
引用本文:李强,王海玉,黄晖.P204萃取分离溶液中的锌与钴[J].有色金属(冶炼部分),2016(6):22-25.
作者姓名:李强  王海玉  黄晖
作者单位:三明学院 资源与化工学院 福建三明 365004,三明学院 资源与化工学院 福建三明 365004,三明学院 资源与化工学院 福建三明 365004
基金项目:福建省中青年教师教育科研项目(JA15478);福建省科技厅高校产学合作科技重大项目(2013Y4007);福建省省级大学生创新项目(201411311060)
摘    要:以P204为萃取剂对锌钴混合溶液中的锌与钴进行萃取分离,探索了相关因素对萃取分离效果的影响。结果表明,在萃取水相pH=4、萃取相比1.0、P204浓度10%、萃取时间10min、振荡速率100r/min的条件下,锌的单级萃取率达到35%左右,而钴的萃取率仅为2%左右,通过四级萃取,锌萃取率达到98%。

关 键 词:P204  萃取      分离
收稿时间:2016/1/11 0:00:00
修稿时间:2016/1/14 0:00:00

Separation of Zinc and Cobalt from Solution with P204
LI Qiang,WANG Hai Yu and HUANG Hui.Separation of Zinc and Cobalt from Solution with P204[J].Nonferrous Metals(Extractive Metallurgy),2016(6):22-25.
Authors:LI Qiang  WANG Hai Yu and HUANG Hui
Affiliation:Resources and Chemical Engineering of San Ming University,San Ming Fu Jian 365004,,
Abstract:Zinc and cobalt were extracted from solution with P204 as extractant. The effects of relevant factors on extraction were investigated. The results show that extraction ratio of single stage of zinc and cobalt is about 35% and 2% respectively under the optimum conditions including pH of aqueous phase of 4, O/A=1.0, P204 concentration of 10%, extraction time of 10 min, and oscillation rate of 100 r/min. Zinc extraction ratio of four stage is 98%.
Keywords:P204  extraction  zinc  cobalt  separation
本文献已被 CNKI 等数据库收录!
点击此处可从《有色金属(冶炼部分)》浏览原始摘要信息
点击此处可从《有色金属(冶炼部分)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号