首页 | 本学科首页   官方微博 | 高级检索  
     


Phase transformation in an Fe-10.1Al-28.6Mn-0.46C alloy
Authors:C C Wu  J S Chou  T F Liu
Affiliation:(1) Institute of Mechanical Engineering, National Chiao Tung University, Hsinchu, Taiwan, 30049, Republic of China;(2) Institute of Materials Science and Engineering, National Chiao Tung University, Hsinchu, Taiwan, 30049, Republic of China
Abstract:The microstructure of an (α + γ) duplex Fe-10.1Al-28.6Mn-0.46C alloy has been investigated by means of optical microscopy and transmission electron microscopy (TEM). In the as-quenched condition, extremely fine D03 particles could be observed within the ferrite phase. During the early stage of isothermal aging at 550 °C, the D03 particles grew rapidly, especially the D03 particles in the vicinity of the α/γ grain boundary. After prolonged aging at 550 °C, coarse K’-phase (Fe, Mn)3AlC precipitates began to appear at the regions contiguous to the D03 particles, and —Mn precipitates occurred on the α/γ and α/α grain boundaries. Subsequently, the grain boundary β-Mn precipitates grew into the adjacent austenite grains accompanied by a γ→ α + β-Mn transition. When the alloy was aged at 650 °C for short times, coarse. K-phase precipitates were formed on the α/γ grain boundary. With increasing the aging time, the α/γ grain boundary migrated into the adjacent austenite grain, owing to the heterogeneous precipitation of the Mn-enrichedK phase on the grain boundary. However, the α/γ grain boundary migrated into the adjacent ferrite grain, even though coarse K-phase precipitates were also formed on the α/γ grain boundary in the specimen aged at 750 °C.
Keywords:
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号