| 水闸钢闸门可靠指标及分项系数的校准 |
| |
| 引用本文： | 周美英,周建方,李典庆.水闸钢闸门可靠指标及分项系数的校准[J].水利水电科技进展,2003,23(6):17-20. |
| |
| 作者姓名： | 周美英 周建方 李典庆 |
| |
| 作者单位： | 1. 河海大学机电工程学院,江苏,常州,213022
2. 上海交通大学船舶与海洋工程学院,上海,200030 |
| |
| 摘 要： | 分析水闸钢闸门所受静水压力的统计参数,采用JC法对水闸钢闸门构件的可靠指标进行初步校准,计算结果表明:闸门构件可靠指标满足一级建筑物的安全水准;提出钢闸门结构设计目标可靠指标的取值建议.根据可靠指标及用钢量与现行规范校准的目标可靠指标及用钢量相比变化不大的原则,采用最小二乘法优化得到结构系数的取值为1 45.
|
| 关 键 词： | 钢闸门 可靠指标 分项系数 结构系数 校准 |
| 文章编号： | 1006-7647(2003)06-0017-04 |
| 修稿时间： | 2003年5月22日 |
Calibration of reliability index and partial factor for steel sluice structures |
| |
| ZHOU Mei ying,et al.Calibration of reliability index and partial factor for steel sluice structures[J].Advances in Science and Technology of Water Resources,2003,23(6):17-20. |
| |
| Authors: | ZHOU Mei ying |
| |
| Abstract: | An analysis is made of the statistic parameters of hydrostatic loads on the steel gate structure. The reliability indexes of the structural members are calibrated by use of the JC method, and the calculated results show that the reliability indexes of the members meet the safety level of class 1 structures. According to the calculated results, a reasonable scope of target reliability indexes is recommended for steel gate design. Based on the principle that the differences in reliability index and steel consumption obtained with the probabilistic limit design method and the current stress design criterion is not significant, an optimal structure coefficient of 1.45 is derived by use of the least square method. |
| |
| Keywords: | steel gate reliability index partial factor structural coefficient calibration |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《水利水电科技进展》浏览原始摘要信息 |
|
点击此处可从《水利水电科技进展》下载全文 |
|
