Ermüdung des Stahles 42CrMo4 unter mehrachsiger,phasenverschobener Beanspruchung

Fatigue of the Quenched and Hardened Steel 42CrMo4 under Multiaxial In- and Out-of-Phase Loading Two kinds of specimens out of the quenched and hardened steel 42CrMo4 (similar SAE 4140) were tested by combined tension-torsion in- and out-of-phase loading. The specimens batches differed in the residual stress state. Under cyclic, stress controlled loading an elastic behaviour is registrated until 50% of the life time. Then a rapid softening occurs, which correlates with the von-Mises equivalent stress in the case of in-phase loading. At high stress amplitudes, the residual stresses may be neglected. The lifetime is best described by the fatigue criterion of Zenner which considers the integral average of the stress state in every plane. This stress state is described by a linear combination of the shear stress amplitude and the normal stress amplitude. Below the cyclic yield strength, the residual stresses must be taken into account as static stresses. The comparison of the local residual stress distributions is possible by using the weakest link model of Heckel, which is described in detail.