| Abstract: | Wear and corrosion protection using Cr and CrN (PVD coating on Al and Mg) Investigations of the wear behaviour of uncoated Magnesium and Aluminium alloys (AZ 91hp, AlSi 7Mg) are showing very high wear rates of these materials. To improve the wear behaviour both materials were coated with 9 μm CrN using PVD (Physical Vapour Deposition) technology. The tribological behaviour of the coated light metals was tested afterwards by using a plate on cylinder tribometer. Looking at the results, wear is reduced enormously. The great number of defects in the coating of the magnesium alloy is showing almost no influence to the wear behaviour. The corrosion behaviour of chromium and chromium nitride coatings was tested on the magnesium alloy. Because of the defects in the coating, caused by defects like pores in the magnesium, only a short term protection of the alloy can be achieved. The corrosion behaviour of multilayer coatings is better than the behaviour of single layer coatings. |
