首页 | 本学科首页   官方微博 | 高级检索  
     

PTFE乳液制备PTFE/YSZ微孔膜及孔隙率的研究
引用本文:杜金丽;邓新华;孙元;罗衍慧;庞向川. PTFE乳液制备PTFE/YSZ微孔膜及孔隙率的研究[J]. 中国塑料, 2010, 24(12): 84-88. DOI: 10.19491/j.issn.1001-9278.2010.12.018
作者姓名:杜金丽  邓新华  孙元  罗衍慧  庞向川
作者单位:天津工业大学天津工业大学天津工业大学
摘    要:以聚四氟乙烯(PTFE)乳液为原料、氧化钇稳定二氧化锆(YSZ)微纳米粉体为增强体,采用机械拉伸法制备了PTFE/YSZ复合微孔膜,通过扫描电子显微镜对其进行了表征,并运用单因素法探讨了分散剂聚乙烯醇(PVA)、拉伸倍数、YSZ含量和热处理温度对复合微孔膜孔隙率的影响。结果表明,在复合微孔膜中添加PVA以及增加YSZ含量均使复合微孔膜的孔隙率增大;在拉伸3.5倍、YSZ含量为8 %(质量份数)、热处理温度为320 ℃时,复合微孔膜孔隙率高达73.09 %。

关 键 词:聚四氟乙烯  氧化钇稳定二氧化锆  微孔膜  孔隙率  
收稿时间:2010-09-13

Preparation of PTFE/YSZ Composite Microporous Membrane by PTFE Resin Emulsion and Investigation on Porosity
Jinli DUXinhua DENGYuan SUNYanhui LUOXiangchuan PANG. Preparation of PTFE/YSZ Composite Microporous Membrane by PTFE Resin Emulsion and Investigation on Porosity[J]. China Plastics, 2010, 24(12): 84-88. DOI: 10.19491/j.issn.1001-9278.2010.12.018
Authors:Jinli DUXinhua DENGYuan SUNYanhui LUOXiangchuan PANG
Abstract:In this paper, PTFE/YSZ composite microporous membrane was prepared by mechanical tension of a PTFE emulsion containing YSZ micro/nanoparticles. The structure and performance of PTFE/YSZ composite microporous membrane were characterized uisng scanning electron microscope (SEM). The effects of the dispersant PVA, draw ratio, YSZ content, and calcination temperature on the porosity of composite microporous membrane were systematically investigated. It was found that the porosity increased significantly with increasing PVA and YSZ contents. The porosity reached 73.09 % when the draw ratio was 3.5 times, YSZ contents 8 %, and the calcinations temperature 320 ℃.
Keywords:polytetroflunoroethylene  yttria stabilized zirconia  microporous membrane  porosity  
点击此处可从《中国塑料》浏览原始摘要信息
点击此处可从《中国塑料》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号