| 基于Pro/E与ANSYS Workbench的液压支架有限元设计 |
| |
| 引用本文： | 尹纪强,王宇,段存虎,商献伟.基于Pro/E与ANSYS Workbench的液压支架有限元设计[J].新技术新工艺,2012(5):10-12. |
| |
| 作者姓名： | 尹纪强 王宇 段存虎 商献伟 |
| |
| 作者单位： | 1. 三一重型装备有限公司支护研究院,辽宁沈阳,110027
2. 三一重型装备有限公司煤安办,辽宁沈阳,110027 |
| |
| 摘 要： | 在Pro/E中建立液压支架三维参数化模型,并将其导入到ANSYS Workbench中进行有限元分析,通过计算其应力和应变的分布来辅助液压支架的设计,提高了设计效率,缩短了设计周期,降低了研发成本,同时提高了液压支架设计的可靠性。
|
| 关 键 词： | 液压支架 三维建模 有限元分析 |
Analysis of the Hydraulic Support of Pro/E and ANSYS Workbench Transport based on Finite Element |
| |
| YIN Jiqiang
,
WANG Yu
,
DUAN Cunhu
,
SHANG Xianwei.Analysis of the Hydraulic Support of Pro/E and ANSYS Workbench Transport based on Finite Element[J].New Technology & New Process,2012(5):10-12. |
| |
| Authors: | YIN Jiqiang WANG Yu DUAN Cunhu SHANG Xianwei |
| |
| Affiliation: | 1. Department of Hydraulic Support, SanYi Heavy Equipment Co. , Ltd,Shenyang 110027,China; 2. Coal Safety Office, SanYi Heavy Equipment Co. , Ltd, Shenyang 110027, China) |
| |
| Abstract: | Used Pro/E to create 3D parametric model of the hydraulic support, and then imported the model into the ANSYS Workbench for finite element analysis, this approach improves design efficiency, shortens the design cycle, reduces costs, and improves the reliability of the design of hydraulic support. |
| |
| Keywords: | Hydraulic support Three-- dimension modeling Finite element analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
