| Pro/E布局模块在注射模标准模架建库中的应用 |
| |
| 引用本文： | 白庆平;池成忠;陈晓伟;张建刚. Pro/E布局模块在注射模标准模架建库中的应用[J]. 中国塑料, 2011, 25(2): 104-107. DOI: 10.19491/j.issn.1001-9278.2011.02.020 |
| |
| 作者姓名： | 白庆平 池成忠 陈晓伟 张建刚 |
| |
| 作者单位： | 太原理工大学材料科学与工程学院 |
| |
| 摘 要： | 对比分析了新旧版塑料注射模模架国家标准，重点介绍了应用Pro/E布局文件和族表建立模架库以及模架调用的方法：先利用族表建立注射模零件库并创建模架布局文件，然后将相应模架组件声明到布局实现模架系列化以方便调用。
|
| 关 键 词： | Pro/Engineering 注射模 标准模架 布局 族表 |
| 收稿时间： | 2010-10-25 |
Application of Pro/E Layout in the Construction of Standard Mould Base Library of Injection Moulds |
| |
| BAI Qingping,CHI Chengzhong,CHEN Xiaowei,ZHANG Jiangang. Application of Pro/E Layout in the Construction of Standard Mould Base Library of Injection Moulds[J]. China Plastics, 2011, 25(2): 104-107. DOI: 10.19491/j.issn.1001-9278.2011.02.020 |
| |
| Authors: | BAI Qingping CHI Chengzhong CHEN Xiaowei ZHANG Jiangang |
| |
| Affiliation: | BAI Qingping,CHI Chengzhong,CHEN Xiaowei,ZHANG Jiangang(College of Materials Science and Engineering,Taiyuan University of Technology,Taiyuan 030024,China) |
| |
| Abstract: | The national standards for injection mould bases were compared with the earlier editions.The way to establish standard mould base library based on layout file was mainly introduced.Firstly,the layout file and the parts library for injection mould base were established.Then the corresponding parts were declared to the layout file so that a set of mould base could be converted to a series to call easily. |
| |
| Keywords: | Pro/Engineering software injection mould standard mould base layout file family table |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国塑料》浏览原始摘要信息 |
|
点击此处可从《中国塑料》下载全文 |
