首页 | 本学科首页   官方微博 | 高级检索  
     

冶炼工艺对管线钢洁净度的影响
引用本文:栗红,常桂华,孙群,陈本文,王荣.冶炼工艺对管线钢洁净度的影响[J].钢铁,2007,42(10):36-38,50.
作者姓名:栗红  常桂华  孙群  陈本文  王荣
作者单位:1. 鞍钢股份有限公司技术中心,辽宁,鞍山,114009
2. 鞍钢股份有限公司第二炼钢厂,辽宁,鞍山,114001
摘    要:研究了LD-LF-CC和LD-ANS-OB-CC两条工艺路线对管线钢洁净度的影响.通过合理的工业试验和金相、化学等分析手段,对冶炼过程钢水中氧、氮含量和夹杂物进行了定量分析.结果表明:钢水经过LF炉和ANS-OB两种精炼工艺处理后钢水洁净度是一致的,采用LD-AND-OB-CC工艺生产某些钢种可降低成本.提出了精炼过程中吹氩工艺是去除夹杂物的主要因素.精炼处理时间40 min,钢中氧、氮和夹杂物基本达到最好水平,继续延长精炼时间钢水中夹杂物没有变化.

关 键 词:夹杂物  精炼工艺  洁净度
文章编号:0449-749X(2007)10-0036-03
修稿时间:2007-04-23

Effect of Refining Process on Purity of Pipe-Line Steel
LI Hong,CHANG Gui-hua,SUN Qun,CHEN Ben-wen,WANG Rong.Effect of Refining Process on Purity of Pipe-Line Steel[J].Iron & Steel,2007,42(10):36-38,50.
Authors:LI Hong  CHANG Gui-hua  SUN Qun  CHEN Ben-wen  WANG Rong
Affiliation:1. Technology Center, Angang Steel Company Limited, Anshan 114009, Liaoning, China ; 2. No. 2 Steelmaking Plant, Angang Steel Company Limited, Anshan 114001, Liaoning, China
Abstract:The effects of LD-LF-CC and LD-ANS-OB-CC refining processes on the purity of pipe-line steel were investigated. The contents of oxygen, nitrogen and inclusions during refining were studied quantitatively by metallographic and chemical analysis. The results indicate that the molten steels refined by LF and ANS-OB are of same cleanness, but the product cost can be reduced by use of LD-ANS-OB-CC. Blowing argon is a main factor for removing inclusions in refining process. The contents of oxygen, nitrogen and inclusions can be reduced to a minimum, when the refining time reaches 40 minutes.
Keywords:inclusion  refining process  purity
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号