| 基于最小二乘法的热量表温度采集模块设计 |
| |
| 引用本文： | 张华强,李玉峰.基于最小二乘法的热量表温度采集模块设计[J].仪表技术与传感器,2011(2). |
| |
| 作者姓名： | 张华强 李玉峰 |
| |
| 作者单位： | 哈尔滨工业大学(威海)电气工程系,山东威海,264209 |
| |
| 摘 要： | 针对热量表的温度采集模块提出了一种新的硬件电路设计方法和软件控制方案.根据最小二乘法的有关理论建立了温度采集模块的数学模型,采用分布图法剔除采集数据中的疏忽误差,由A/D转换器采集的电压值直接转换成对应的温度值,采用分时供电技术,实现了温度采集模块的低功耗、高精度和高效率.理论分析和实际测试表明:该电路工作稳定,计算简便,理论误差小于0.000 8℃,实测误差小于0.04℃,满足普通热量表误差小于0.1℃的要求,因而具有很大的实用价值.
|
| 关 键 词： | 热量表 最小二乘法 分布图法 分时供电 |
Design of Heat Meter Temperature Acquisition Module Based on Least Squares Method |
| |
| ZHANG Hua-qiang,LI Yu-feng.Design of Heat Meter Temperature Acquisition Module Based on Least Squares Method[J].Instrument Technique and Sensor,2011(2). |
| |
| Authors: | ZHANG Hua-qiang LI Yu-feng |
| |
| Affiliation: | ZHANG Hua-qiang,LI Yu-feng(Department of Electrical Engineering,Harbin Institute of Technology at Weihai,Weihai 264209,China) |
| |
| Abstract: | A new design method of hardware circuit and software control scheme of heat meter temperature acquisition module was proposed.According to the theory of least square method,the mathematical model of the temperature acquisition module was established.It used the distribution curve method to eliminate the missing error of the data acquisition.The collected voltage data from the A/D converter can be changed into the corresponding temperature value directly.The low power,high precision and high efficiency of th... |
| |
| Keywords: | heat meter least squares method distribution curve method time-sharing power supply |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
