首页 | 本学科首页   官方微博 | 高级检索  
     

自动轧管机顶头的生产工艺改进
引用本文:于杰栋,魏玉芝,姚忠卯,王福信.自动轧管机顶头的生产工艺改进[J].钢管,2007,36(6):49-51.
作者姓名:于杰栋  魏玉芝  姚忠卯  王福信
作者单位:安阳钢铁股份有限公司,河南,安阳,455004
摘    要:为解决无缝钢管厂存在的Φ130,90mm自动轧管机组球形顶头(材质Cr35Ni4Si高铬镍铸钢)质量差、寿命低等问题,对其使用条件和影响因素进行了探讨。通过调整自动轧管机球形顶头的成分,增设热处理工序等措施实现优化自动轧管机球形顶头的生产工艺。实践证明,采用上述改进措施,尤其是增设热处理工序后,自动轧管机球形顶头的性能得到显著改善,使用寿命提高4倍以上。

关 键 词:自动轧管机  球形顶头  生产工艺  成分  热处理  改进
文章编号:1001-2311(2007)06-0049-03
收稿时间:2007-03-03

Improvement of Manufacture Process for Plug of Plug Pipe Mill
Yu Jiedong,Wei Yuzhi,Yao Zhongmao,Wang Fuxin.Improvement of Manufacture Process for Plug of Plug Pipe Mill[J].Steel Pipe,2007,36(6):49-51.
Authors:Yu Jiedong  Wei Yuzhi  Yao Zhongmao  Wang Fuxin
Abstract:Addressing the problems concerning the spherical plug(material:Cr35Ni4Si cast steel)of the Φ130,90 mm plug mill of the seamless steel pipe plant,including poor quality and short service life,etc.,rele-vant application conditions and influencing elements are discussed. The manufaturing process for the plug mill spherical plug is optimized by means of taking actions like rimming the chemical composition of the plug material and additional heat treatment process. Relevant operation practice shows that thanks to these actions as taken,particularly the heat treatment process,the properties of the said spherical plug is significantly improved,and its service life is four times longer than before.
Keywords:Plug pipe mill  Spherical plug  Manufacturing process  Chemical composition  Heat treatment  Improvement
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号