| 齿轮双面啮合检查仪的微机化改造 |
| |
| 引用本文： | 耿宗亮,王兰城,于复生,刘迎春. 齿轮双面啮合检查仪的微机化改造[J]. 工具技术, 2003, 37(9): 53-54 |
| |
| 作者姓名： | 耿宗亮 王兰城 于复生 刘迎春 |
| |
| 作者单位： | 山东建筑工程学院;山东潍坊科技职业学院 |
| |
| 摘 要： | 介绍了对齿轮双面啮合检查仪计算机改造的原理、硬件电路及软件构成。系统硬件部分主要由电感测微仪、12位A/D转换器和单片机AT89C5 1组成 ,采用RS2 32接口与计算机进行串行通讯 ,上位机采用VB6 .0作为人机界面和数据处理平台 ,可实时显示、存储和分析测量数据及打印标准的检测报告。该系统可使误差测量过程变得简单可靠
|
| 关 键 词： | 齿轮 齿轮径向综合误差 齿轮一齿径向综合误差 VB6.0 |
Automation Measurement Reconstruction of Two-Flank Gear Rolling Tester |
| |
| Geng Zongliang Wang Lancheng Yu Fusheng et al. Automation Measurement Reconstruction of Two-Flank Gear Rolling Tester[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2003, 37(9): 53-54 |
| |
| Authors: | Geng Zongliang Wang Lancheng Yu Fusheng et al |
| |
| Affiliation: | Geng Zongliang Wang Lancheng Yu Fusheng et al |
| |
| Abstract: | The principle, hardware circuits and software structure of computer reconstruction of two flank gear rolling tester are introduced. The hardware system of the new computer construction is made up of an inductance scale micrometer, a chip of 12Bit A/D device and a chip of AT89C51 MCU. The communication between the single chip MCU and the computer is through RS232. Visual Basic 6.0 is used to be the interface and the data processing of the software to real time display,save, analyze and print the measurement results data expediently in the computer. The measuring process is simple and steady with the new construction of the system. |
| |
| Keywords: | gear gear radial composite error single tooth radial composite error VB6.0 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
