| 基于CAD窄筋连接电脑电池薄壳件的注塑模具设计 |
| |
| 引用本文： | 覃霞玲.基于CAD窄筋连接电脑电池薄壳件的注塑模具设计[J].工程塑料应用,2019,47(4):85-89. |
| |
| 作者姓名： | 覃霞玲 |
| |
| 作者单位： | 广西民族大学相思湖学院,南宁,530008 |
| |
| 基金项目： | 2018年度广西高等教育本科教学改革工程项目资助课题(2018JGB403 |
| |
| 摘 要： | 针对薄壳件注塑模具设计中要求的填充时间短、物料流动性好、注射速度快等,以窄筋连接的某品牌电脑电池外壳为基础,利用CAD软件对此电脑电池外壳进行注塑模具设计。且在设计过程中以薄壳件注塑模具的流体运动模型为基础,结合CAE软件进行了模流分析。实践表明:采用CAD技术,借助CAE软件,可以提高模具的设计质量,缩短填充时间和模具开发周期。
|
| 关 键 词： | 丙烯腈–丁二烯–苯乙烯塑料 薄壳件 注塑模具 |
Design of Injection Mold for CAD-based Narrow-Beam Connection Computer Battery Thin Case |
| |
| Qin Xialing.Design of Injection Mold for CAD-based Narrow-Beam Connection Computer Battery Thin Case[J].Engineering Plastics Application,2019,47(4):85-89. |
| |
| Authors: | Qin Xialing |
| |
| Affiliation: | (Xiangsihu College of Guangxi University for Nationalities,Nanning 530008,China) |
| |
| Abstract: | The design of injection molds is carried out using CAD software based on a brand of computer battery case connected by narrow ribs to solve short filling time,good material flow and fast injection speed in the design of thin-shell injection molds, and the design based on the fluid motion model of the thin-shell injection mold,combined with CAE software mold flow analysis. Practice shows that :CAD technology,with CAE software,can improve mold design quality,shorten filling time and mold development cycle. |
| |
| Keywords: | acrylonitrile butadiene styrene plastics thin shell injection mold |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
