| 方形重掺杂硅薄膜的极限载荷分析* |
| |
| 引用本文： | 徐晨,施梦娱,赵林林,李博,沈光地. 方形重掺杂硅薄膜的极限载荷分析*[J]. 传感技术学报, 2006, 19(5): 1617-1619 |
| |
| 作者姓名： | 徐晨 施梦娱 赵林林 李博 沈光地 |
| |
| 作者单位： | 北京工业大学电子信息与控制工程学院,光电子技术实验室,北京,100022 |
| |
| 基金项目： | 北京市人才强教计划项目资助(5002015200504) |
| |
| 摘 要： | 考虑残余应力的情况下,薄膜在大挠度时总应力的解析表达式.通过实验观察,深腐蚀得到的浓硼重掺杂硅薄膜表面存在微蚀坑.考虑微蚀坑和残余应力的影响,运用总应力表达式和Griffith裂口强度理论,定量的得到方形浓硼重掺杂硅薄膜的最大挠度和极限载荷Pmax,与已报道的实验值相符.从而解释了浓硼重掺杂硅薄膜的实际断裂强度值远小于晶体理论断裂强度值的矛盾.可以得出,极限载荷Pmax不仅与薄膜的尺寸与形状有关,而且也与材料特性,特别是与制备工艺有关.
|
| 关 键 词： | 微机械 浓硼硅薄膜 残余应力 微蚀坑 极限载荷 Griffith裂口强度理论 |
| 文章编号： | 1004-1699(2006)05-1617-03 |
| 修稿时间： | 2006-07-01 |
Analysis for Load Limitation of Square shaped boron-doped Silicon Diaphragm |
| |
| Xu Chen,Shi Mengyu,Zhao Linlin,Li Bo,Shen Guangdi. Analysis for Load Limitation of Square shaped boron-doped Silicon Diaphragm[J]. Journal of Transduction Technology, 2006, 19(5): 1617-1619 |
| |
| Authors: | Xu Chen Shi Mengyu Zhao Linlin Li Bo Shen Guangdi |
| |
| Affiliation: | Beijing Optoelectronic Technology Laboratory , College of Electronic Information & Control Engineering, Beijing University of technology, Beijing, 100022, CHN |
| |
| Abstract: | Considering the residual stress, the total stress analytical solutions for square-shaped boron-doped silicon diaphragms with large deflection are presented. With this total stress analytical solution and Griffith fracture criterion, the maximum displacement and load limitation P_ max of the square-shaped boron-doped silicon diaphragms are calculated, and the results agree well with the reported experiment results. Load limitation P_ max is not only related with the shape and the dimension of diaphragms, but also dependent on material characteristics, especially the fabrication process. |
| |
| Keywords: | MEMS Square-shaped diaphragm residual stress fracture stress load limitation Griffith fracture criterion |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《传感技术学报》浏览原始摘要信息 |
|
点击此处可从《传感技术学报》下载全文 |
|
