| 预测控制在钢坯闪光焊顶锻控制系统中的应用 |
| |
| 引用本文： | 卢宁,付永领,孙新学.预测控制在钢坯闪光焊顶锻控制系统中的应用[J].焊接学报,2006,27(9):85-88. |
| |
| 作者姓名： | 卢宁 付永领 孙新学 |
| |
| 作者单位： | 北京航空航天大学,自动化工程学院,北京,100083 |
| |
| 摘 要： | 分析了无头轧制系统中钢坯闪光焊的特点,针对于顶锻阶段的同步要求提出了一种基于神经元的同步误差预测控制方案.使用软件AMEsim建立了钢坯闪光焊的非线性液压系统模型和机械耦合系统模型,通过与控制系统接口实现了AMEsim与Simulink的电液联合仿真.仿真结果表明,基于神经元预测控制的同步误差调节器具有明显的优越性.
|
| 关 键 词： | 预测控制器 同步控制 AMEsim软件 闪光焊 无头轧制 |
| 文章编号： | 0253-360X（2006）09-085-04 |
| 收稿时间： | 09 27 2005 12:00AM |
| 修稿时间： | 2005-09-27 |
Pre-controller used in press synchronism control system of bill flash butt welding |
| |
| LU Ning,FU Yong-ling and SUN Xin-xue.Pre-controller used in press synchronism control system of bill flash butt welding[J].Transactions of The China Welding Institution,2006,27(9):85-88. |
| |
| Authors: | LU Ning FU Yong-ling and SUN Xin-xue |
| |
| Affiliation: | School of Automation Science and Electronic Engineering, Beihang University, Beijing 100083, China,School of Automation Science and Electronic Engineering, Beihang University, Beijing 100083, China and School of Automation Science and Electronic Engineering, Beihang University, Beijing 100083, China |
| |
| Abstract: | The characteristics of billet flash butt welding on endless welding rolling were analyzed.To meet the demand of synchronization in butting phase,a scheme to predict and control the synchronization error besed on neural network was presented.A nonlinear hydraulic system and a coupling model were designed with AMEsim.Through the interface between Simulink and AMEsim,cosimulation was achieved.The result shows that the pre-controller exhibits excellent performance. |
| |
| Keywords: | pre-controller synchronism control AMEsim flash butt welding endless welding rolling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
