| 载重子午线轮胎帘线受力有限元分析 |
| |
| 引用本文： | 陈芳,王国林,高先进,张建,应世洲. 载重子午线轮胎帘线受力有限元分析[J]. 橡胶工业, 2008, 55(2): 80-84 |
| |
| 作者姓名： | 陈芳 王国林 高先进 张建 应世洲 |
| |
| 作者单位： | 1. 江苏大学,风神江大车轮研究所,江苏,镇江,212013
2. 风神轮胎股份有限公司,河南,焦作,454003 |
| |
| 摘 要： | 基于ABAQUS非线性有限元分析软件建立12.00R20载重子午线轮胎有限元模型,并分析轮胎在标准充气压力、不同载荷条件下静态加载时帘线受力变化的基本特征.结果表明,负荷对轮胎接地区域内帘线受力影响显著,带束层和胎体帘布层以接地影响区边缘为帘线受力变化的分界点;胎圈部位胎体帘线受力随载荷增大而减小的幅度很小,有利于减小胎体端部的应变.
|
| 关 键 词： | 载重子午线轮胎 有限元模型 帘线受力 载重子午线轮胎 轮胎帘线 受力影响 有限元分析 tire force cord element analysis 应变 载荷条件 胎体帘线 胎圈 分界点 边缘 影响区 帘布层 带束层 区域 负荷 结果 |
| 文章编号： | 1000-890X（2008）02-0080-05 |
| 收稿时间： | 2007-08-23 |
| 修稿时间： | 2007-08-23 |
Finite element analysis for cord force of TBR tire |
| |
| CHEN Fang,WANG Guo-lin,GAO Xian-jin,ZHANG Jian and YING Shi-zhou. Finite element analysis for cord force of TBR tire[J]. China Rubber Industry, 2008, 55(2): 80-84 |
| |
| Authors: | CHEN Fang WANG Guo-lin GAO Xian-jin ZHANG Jian YING Shi-zhou |
| |
| Abstract: | A FE model of 12.00R20 TBR tire was established with ABAQUS non-linear FEA software, and the fundamental characteristics of cord force under rated inflation pressure and different load conditions were analyzed. The results showed that the distribution of cord force in the contact zone was affected significantly by load conditions, and the margin of the contact zone was where the cord force distribution of belt and carcass changed;and the carcass force decreased a little when the load increased, so it was propitious to decrease the strain at the end of carcass. |
| |
| Keywords: | TBR tire FE model cord force |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《橡胶工业》浏览原始摘要信息 |
|
点击此处可从《橡胶工业》下载全文 |
|
