| 控制锌层厚度的一种有效方法 |
| |
| 引用本文： | 董占东.控制锌层厚度的一种有效方法[J].轧钢,2010,27(3):56-58. |
| |
| 作者姓名： | 董占东 |
| |
| 作者单位： | 中冶恒通冷轧技术有限公司镀锌厂 |
| |
| 摘 要： | 介绍了锌层厚度控制的主要方法，结合中冶恒通冷轧技术有限公司镀锌厂生产实践，提出一种通过气刀风机增压改造而有效控制锌层厚度的方法，其在生产速度达到140m/min时，锌层重量可控制为62g/m2左右。
|
| 关 键 词： | 镀层厚度 气刀风机 锌耗 |
An Effective Method of Control the Zinc Coating Thickness |
| |
| DONG Zhan-dong.An Effective Method of Control the Zinc Coating Thickness[J].Steel Rolling,2010,27(3):56-58. |
| |
| Authors: | DONG Zhan-dong |
| |
| Affiliation: | DONG Zhan-dong (MCC Hengtong Cold Rolling Technology Co.,Ltd.,Tangshan 063611,China) |
| |
| Abstract: | The main measures of control the zinc coating thickness were introduced.Based on the practical production experience,an effective method was put forward,which was adding the pressure of air knife.The good effect was obtained that zinc coating thickness can be controlled at about 62 g/m~2 under the condition of production speed at 140 m/min. |
| |
| Keywords: | zinc coating thickness air knife blower zinc consumption |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《轧钢》浏览原始摘要信息 |
|
点击此处可从《轧钢》下载全文 |
