首页 | 本学科首页   官方微博 | 高级检索  
     

基于两流体模型的流动沸腾瞬态数值模拟程序
引用本文:任志豪,匡波,胡尚武. 基于两流体模型的流动沸腾瞬态数值模拟程序[J]. 核动力工程, 2012, 33(Z1): 69-74
作者姓名:任志豪  匡波  胡尚武
作者单位:1. 上海交通大学核科学与工程学院,上海,200240;中科华核电技术研究院,广东深圳,518026
2. 上海交通大学核科学与工程学院,上海,200240
摘    要:基于两流体模型与固壁非稳态导热模型,结合相关关联式组合,建立了流道内流动沸腾传热的瞬态数值模拟程序。通过不同入口瞬态下流道两相流动沸腾过程的算例计算分析,确认了程序进行流动沸腾瞬态模拟的能力。通过对不同固壁加热条件下流动沸腾行为的算例计算,检验了该程序进行流壁耦合行为模拟的功能。程序可进一步向系统分析程序和子通道程序发展。

关 键 词:两流体模型  流动沸腾传热  瞬态数值模拟程序

Transient Simulation Code for Flow Boiling Based on Two-Fluid Model
REN Zhi-hao , KUANG Bo , HU Shang-wu. Transient Simulation Code for Flow Boiling Based on Two-Fluid Model[J]. Nuclear Power Engineering, 2012, 33(Z1): 69-74
Authors:REN Zhi-hao    KUANG Bo    HU Shang-wu
Affiliation:1.School of Nuclear Science and Engineering,Shanghai Jiao Tong University,Shanghai,200240,China; 2.China Nuclear Power Technology Research Institute,Shenzhen,Guangdong,518026,China
Abstract:Based on the coupling of two-fluid and wall dynamics models,and selection of specific corre-lation combination,a transient simulation code on flow boiling and heat transfer analysis within heated chan-nel is developed.Through benchmark simulation on different flow boiling cases with various inlet parameters transients,capabilities of the code transient simulating flow boiling behaviors is validated.Furthermore,the fluid-wall heat coupling simulation function of the code are tested through case studies on boiling heat trans-fer under different wall heating conditions.Starting from the present basis,the program is expected to be fur-ther developed forwarding to both system analysis and sub-channel analysis codes,which might demonstrate its feature of expansion and prospect of practical applications.
Keywords:Two-fluid model  Boiling flow and heat transfer  Transient simulation code
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号