首页 | 本学科首页   官方微博 | 高级检索  
     

超低密度聚乙烯泡沫的热致相分离制备
引用本文:罗炫,张林,杜凯,方瑜,杜爱民,范勇恒. 超低密度聚乙烯泡沫的热致相分离制备[J]. 原子能科学技术, 2008, 42(7): 598-601. DOI: 10.7538/yzk.2008.42.07.0598
作者姓名:罗炫  张林  杜凯  方瑜  杜爱民  范勇恒
作者单位:中国工程物理研究院 ;激光聚变研究中心,四川 ;绵阳 ;621900
基金项目:高温高密度等离子体物理国防科技重点实验室基金资助项目
摘    要:利用聚合物溶液的热致相分离和冷冻干燥技术,制备出了具有开放状网络孔洞结构的超低密度微孔聚乙烯泡沫。所得泡沫密度为5.8mg/cm3,对应的平均孔径为25μm。结构分析结果表明,泡沫的结构主要取决于聚乙烯溶液的相分离过程。

关 键 词:冷冻干燥   热致相分离   超高分子量聚乙烯   超低密度泡沫
收稿时间:2007-09-28
修稿时间:2007-12-30

Fabrication of Ultra-low Density Polyethylene Foams From Thermally-Induced Phase Separation
LUO Xuan ZHANG Lin DU Kai FANG Yu DU Ai-min FAN Yong-heng. Fabrication of Ultra-low Density Polyethylene Foams From Thermally-Induced Phase Separation[J]. Atomic Energy Science and Technology, 2008, 42(7): 598-601. DOI: 10.7538/yzk.2008.42.07.0598
Authors:LUO Xuan ZHANG Lin DU Kai FANG Yu DU Ai-min FAN Yong-heng
Affiliation:Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang 621900, China
Abstract:The ultra-low density porous polyethylene foams with open-network structure, density of 5.8 mg/cm3, corresponding cell size of 25 μm were fabricated by the thermally-induced phase separation (TIPS) technique and the freeze-drying technique. The experiments show that the morphologies of these foams are determined by the thermodynamics and kinetics of phase separation.
Keywords:freezing-dry  thermally-induced phase separation  UHMW-PE  ultra-low density foam
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《原子能科学技术》浏览原始摘要信息
点击此处可从《原子能科学技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号