首页 | 本学科首页   官方微博 | 高级检索  
     

基于PSCAD/EMTDC的背靠背高压直流输电系统仿真
引用本文:高晓旺,周勇,康鲁豫. 基于PSCAD/EMTDC的背靠背高压直流输电系统仿真[J]. 电力自动化设备, 2007, 27(2): 69-70,74
作者姓名:高晓旺  周勇  康鲁豫
作者单位:郑州大学,电气工程学院,河南,郑州,450002;南京电力自动化设备总厂,江苏,南京,210003
摘    要:为了研究灵宝背靠背换流站在交流系统发生故障时的换相失败过程,利用电磁暂态仿真软件PSCAD/EMTDC对灵宝背靠背高压直流输电系统进行了建模,并在此基础上对高压直流输电系统中常见的故障进行了仿真分析,其中包括逆变侧交流系统发生三相故障和单相故障的情况。仿真结果表明,在PSCAD/EMTDC环境下建立的模型能够比较准确地描述在暂态过程中背靠背直流输电系统的动态特性,可以为现场运行以及故障分析提供参考。在系统中加入故障检测控制环节,根据电压和电流的变化,适时增大提前触发角,可以有效地预防换相失败。

关 键 词:背靠背  PSCAD/EMTDC  仿真
文章编号:1006-6047(2007)02-0069-02
收稿时间:2006-04-06
修稿时间:2006-04-062006-10-08

Simulation of back-to-back HVDC system with PSCAD/EMTDC
GAO Xiao-wang,ZHOU Yong,KANG Lu-yu. Simulation of back-to-back HVDC system with PSCAD/EMTDC[J]. Electric Power Automation Equipment, 2007, 27(2): 69-70,74
Authors:GAO Xiao-wang  ZHOU Yong  KANG Lu-yu
Affiliation:1. Zhengzhou University,Zhengzhou 450002, China; 2. Nanjing Electric Power Automation Equipment General Factory,Nanjing 210003,China
Abstract:PSCAD / EMTDC(Power System Computer Aided Design / Electro-Magnetic Transient in DC system) software is used to establish the model of Lingbao back-to-back HVDC(High Voltage DC transmission) system in studying its commutation failure during AC system fault.Based on it,the general faults of HVDC system are simulated,including three-phase fault and single-phase fault of AC system at inverter side.Simulation results show that,the model built in PSCAD / EMTDC can accurately simulate the dynamic behavior of back-to-back HVDC system in transient process and provide references for field operation and fault analysis.By adding the fault detection & control unit in system,the advanced firing angle is raised to effectively prevent the commutation failure according to the change of voltage and current.
Keywords:back-to-back  PSCAD / EMTDC  simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《电力自动化设备》浏览原始摘要信息
点击此处可从《电力自动化设备》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号