Dynamic Oxygen Storage Capacity Measurements on Ceria-Based Material

The constant increase in the number of environ-mental protection regulations worldwide has broughtabout significant restrictions onthe nature and quantityof exhaust gases originating from mobile sources suchas automobile emissions .These increasingly dema…

Dynamic Oxygen Storage Capacity Measurements on Ceria-Based Material

Dynamic oxygen storage and release capability (OSC) measurement apparatus was designed to evaluate the OSC performance of ceria-based oxygen storage material. The optimum measurement condition was at a frequency of 0.1 Hz with the inlet gas-flow sequence CO (5S)→O2 (5S)→CO→O2 and a flow rate of 300 ml·min-1. Under this condition, similar regular square wave in the inlet and outlet of the reactor was obtained to guarantee the reliability of the dynamic OSC results. The dynamic OSC performance of the CeO2 and Ce0.67Zr0.33O2 mixed oxide prepared using the citric sol-gel method was studied at the optimum measurement condition with focus on both quantitative and qualitative analyses. The results reveal distinctly that Ce0.67Zr0.33O2 had better dynamic OSC performance because of its higher oxygen migration rate than CeO2. Under dynamic conditions, two CO2 production peaks occurred corresponding to the CO pulse and the O2 pulse, respectively, during the entire cycle. The intensity and ratio between the two CO2 productions were highly influenced by temperature and frequency indicating complex surface phenomena during the oxygen storage/release process. As a result, this set-up can be applied to the evaluation of ceria-based material on the OSC performance.