| 高温比例与非比例加载下多轴疲劳寿命预测 |
| |
| 引用本文： | 尚德广,孙国芹,蔡能,陈建华,王建国,王连庆,王红缨,唐俊武.高温比例与非比例加载下多轴疲劳寿命预测[J].机械强度,2006,28(2):245-249. |
| |
| 作者姓名： | 尚德广 孙国芹 蔡能 陈建华 王建国 王连庆 王红缨 唐俊武 |
| |
| 作者单位： | 1. 北京工业大学,机电学院,北京,100022
2. 北京科技大学,新金属材料国家重点实验室,北京,100083 |
| |
| 基金项目： | 中国科学院资助项目;北京市教委科技发展计划项目 |
| |
| 摘 要： | 针对拉扭多轴疲劳加载情况，分析最大剪切平面上的应变特性。利用临界损伤平面原理确定不同加载参数下的临界损伤平面，在此基础上提出一种基于单轴疲劳材料常数和高温蠕变特性的高温多轴疲劳寿命预测模型。利用高温合金材料GH4169薄壁管疲劳试样在控制应变拉扭循环加载下的试验数据，对所提出的寿命模型进行验证。结果表明，在高温低周拉扭循环加载下，所提出的高温疲劳寿命预测模型可以较好地预测高温疲劳寿命。
|
| 关 键 词： | 多轴疲劳 比例加载与非比例加载 高温 蠕变 寿命预测 |
| 收稿时间： | 2005-01-04 |
| 修稿时间： | 2005-01-042005-07-04 |
MULTIAXIAL FATIGUE LIFE PREDICTION UNDER PROPORTIONAL AND NON-PROPORTIONAL LOADING AT HIGH TEMPERATURE |
| |
| SHANG DeGuang,SUN GuoQin,CAI Neng,CHEN JianHua,WANG JianGuo,WANG LianQing,WANG HongYing,TANG JunWu.MULTIAXIAL FATIGUE LIFE PREDICTION UNDER PROPORTIONAL AND NON-PROPORTIONAL LOADING AT HIGH TEMPERATURE[J].Journal of Mechanical Strength,2006,28(2):245-249. |
| |
| Authors: | SHANG DeGuang SUN GuoQin CAI Neng CHEN JianHua WANG JianGuo WANG LianQing WANG HongYing TANG JunWu |
| |
| Affiliation: | 1. College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100022, China ;2. State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing , Beijing 100083, China |
| |
| Abstract: | The characteristics of strains on the maximum shear plane were analyzed under tension-torsion multiaxial fatigue loading. The critical damage planes were determined by the critical plane principle under different loading parameters. On the basis of the uniaxial fatigue constants at high temperature, a multiaxial fatigue damage parameter was proposed to calculate the pure fatigue damage. The half of maximum equivalent amplitude is used as the creep stress to calculate creep damage. Hence, a linear multiaxial creep-fatigue life prediction model was proposed to predict the creep-fatigue life at high temperature. The multiaxial fatigue data for thin tubular specimens made by a high supperalloy GH4169 were used to verify the proposed multiaxial fatigue life prediction model under proportional and nonproportional loading at high temperature. The results shown that the proposed multiaxial fatigue life prediction model can accurately predict multiaxial creep-fatigue life at high temperature. The error is within a factor of 2. |
| |
| Keywords: | Multiaxial fatigue Proportional and nonproportional loading High temperature Creep Life prediction |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
