首页 | 本学科首页   官方微博 | 高级检索  
     

基于磁-热-应力耦合计算的密集型母线槽热性能分析
引用本文:褚明娟,林莘,李岩,徐建源,吴锐,周丽杰. 基于磁-热-应力耦合计算的密集型母线槽热性能分析[J]. 低压电器, 2005, 0(3): 10-12,24
作者姓名:褚明娟  林莘  李岩  徐建源  吴锐  周丽杰
作者单位:1. 沈阳工业大学,电气工程学院,辽宁,沈阳,110023
2. 江苏长江电气集团有限公司,江苏,镇江,212211
摘    要:利用ANSYS软件建立了密集型母线槽的磁-热-应力耦合分析的二维模型.首先计算了三相五线制密集型母线槽的工频磁场、焦耳热;然后将焦耳热作为热源,通过间接耦合方法分析了母线槽内部的温度场,得出其导体及外壳上的温度分布;相应地将温度作为载荷,计算母线槽的应力场,得出母线槽由于热膨胀而产生的变形.

关 键 词:母线槽  磁-热-应力  热性能  耦合分析
文章编号:1001-5531(2005)03-0010-03

Thermal Performance Analysis of Compact Busbar Trunking System Based on the Magnetic-Thermal Stress Coupling Calculation
CHU Ming-juan,LIN Xin,LI Yan,XU Jian-yuan,WU Rui,ZHOU Li-jie. Thermal Performance Analysis of Compact Busbar Trunking System Based on the Magnetic-Thermal Stress Coupling Calculation[J]. Low Voltage Apparatus, 2005, 0(3): 10-12,24
Authors:CHU Ming-juan  LIN Xin  LI Yan  XU Jian-yuan  WU Rui  ZHOU Li-jie
Abstract:The magnetic-thermal-stress model (2-D) of compact busbar trunking system was established and power frequency magnetic field and joule heat were calculated for three phases five conductors compact busbar trunking system in this paper. And considering joule heat as thermal resource, temperature field in the busbar trunking system was computed and analyzed. Finally, considering temperature as load, stress field was computed and distortion of busbar trunking system was obtained, which was formed because of thermal swell. In this process, the ANSYS software was used.
Keywords:busbar trunking system  magnetic-thermal-stress  thermal performance  coupling analysis
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号