| 基于自顶向下的水轮发电机组参数化设计方法研究 |
| |
| 引用本文： | 吴维金,李强,陈向东.基于自顶向下的水轮发电机组参数化设计方法研究[J].水力发电,2010,36(1). |
| |
| 作者姓名： | 吴维金 李强 陈向东 |
| |
| 作者单位： | 1. 中国水电顾问集团成都勘测设计研究院,四川成都,610072
2. 成都希盟泰克科技发展有限公司,四川成都,610041 |
| |
| 摘 要： | 介绍了基于参数化技术的自顶向下的设计过程和实施方法,并以三维参数化设计软件CATIA为平台,结合混流式水轮发电机组的自顶向下参数化设计为实例,研究了以"顶层基本骨架"模型为核心的自顶向下参数化设计过程。
|
| 关 键 词： | 水轮发电机组 参数化建模 顶层基本骨架 |
The Optimization and Selection of Hydro-generating Unit's Parameters Based on Top-down Method |
| |
| Wu Weijin,Li Qiang,Chen Xiangdong.The Optimization and Selection of Hydro-generating Unit's Parameters Based on Top-down Method[J].Water Power,2010,36(1). |
| |
| Authors: | Wu Weijin Li Qiang Chen Xiangdong |
| |
| Affiliation: | Wu Weijin1,Li Qiang2,Chen Xiangdong1(1.Hydrochina Chengdu Engineering Corparation,Chengdu Sichuan 610072,2.Chengdu SimuTech & Technology Development Co.,Ltd.,Chengdu Sichuan 610041) |
| |
| Abstract: | The design process and implementation method based on top-down method for the selection hydro-generating unit's parameters are introduced.Regarding the three-dimensional CATIA software as platform,the top-down parametric design process based on top basic skeleton model is studied for the design of Francis turbine unit. |
| |
| Keywords: | CATIA |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
