| 复杂制品注塑成型模拟分析 |
| |
| 引用本文： | 黄锦旗,曲杰,黄汉雄.复杂制品注塑成型模拟分析[J].塑料科技,2006,34(5):74-79. |
| |
| 作者姓名： | 黄锦旗 曲杰 黄汉雄 |
| |
| 作者单位： | 华南理工大学工业装备与控制工程学院,塑料橡胶装备及智能化研究中心,广东,广州,510640 |
| |
| 基金项目： | 粤港关键领域重点突破项目 |
| |
| 摘 要： | 应用CAE软件MoldflowPlasticsInsight4.1的充模、保压、冷却、翘曲等分析模块,对汽车尾门饰件注塑成型过程进行CAE分析,研究了浇口位置、工艺参数等对制品性能的影响。最后,基于模拟结果分析了制品翘曲的主要原因,为模具设计及注塑工艺的确定提供参考。
|
| 关 键 词： | 注塑成型 CAE分析 工艺参数 尾门饰件 |
| 文章编号： | 1005-3360（2006）05-0074-06 |
| 收稿时间： | 2006-04-03 |
| 修稿时间： | 2006-04-03 |
Simulation Analysis on Complicated Injection Molding Product |
| |
| Huang Jinqi,Qu Jie,Huang Hanxiong.Simulation Analysis on Complicated Injection Molding Product[J].Plastics Science and Technology,2006,34(5):74-79. |
| |
| Authors: | Huang Jinqi Qu Jie Huang Hanxiong |
| |
| Affiliation: | Center for Polymer Processing Equipment and Intellectualization, College of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou 510640, China |
| |
| Abstract: | It simulated injection molding process of boot-hood decoration of a car by using, the CAE software Moldflow Plastics Insight 4.1. involving filling, packing, cooling and warping analysis modules. It studied the influencing effects of injection gate location and processing parameters on the performances of products. Then, it analyzed the main causes of the warp, and provided analog approach for mold design and the determination of processing parameters. |
| |
| Keywords: | Injection molding CAE analysis Processing parameters Car tail door decoration |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
