首页 | 本学科首页   官方微博 | 高级检索  
     

煤矿提升机双馈调速系统变流器功率容量研究
引用本文:李良光,曹晓鸽.煤矿提升机双馈调速系统变流器功率容量研究[J].电气传动,2012,42(3):7-10.
作者姓名:李良光  曹晓鸽
作者单位:安徽理工大学电气与信息工程学院,安徽淮南,232001
摘    要:根据煤矿提升机的负载特性与运行特点,研究交流提升机交-直-交双边PWM变流器双馈调速系统在分别采用直接启动和单双馈混合启动两种不同模式条件下,变流器的额定功率容量差别。通过Matlab软件仿真对比,证实了煤矿提升机双馈调速系统采用单双馈混合启动模式的变流器额定功率容量,要比直接启动模式的变流器额定功率容量降低约38%。

关 键 词:煤矿提升机  双馈调速  变流器  功率容量  异步电机

Research on Converter Power Capacity of Mine Hoist Doubly Fed Speed Control System
LI Liang-guang , CAO Xiao-ge.Research on Converter Power Capacity of Mine Hoist Doubly Fed Speed Control System[J].Electric Drive,2012,42(3):7-10.
Authors:LI Liang-guang  CAO Xiao-ge
Affiliation:(College of Electrical and Information Engineering,Anhui University of Science & Technology,Huainan 232001,Anhui,China)
Abstract:Based on the load features and operating characteristics of mine hoist,the rating capacity of converter power in AC-DC-AC dual PWM converter doubly fed speed control system was researched in the direct starting mode and in the single and double feed hybrid mode.According to Matlab simulation,it is confirmed that the converter power capacity of mine hoist doubly fed speed control system in the single and double feed hybrid mode is about 38% less than the power capacity in the direct starting mode.
Keywords:mine hoist  doubly fed speed control  converter  power capacity  induction motor
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号