首页 | 本学科首页   官方微博 | 高级检索  
     

X80管线钢焊接接头在含硫介质中耐蚀性的研究
引用本文:王娜,雷阿利.X80管线钢焊接接头在含硫介质中耐蚀性的研究[J].焊管,2010,33(5):24-29.
作者姓名:王娜  雷阿利
作者单位:1. 西安工业大学,北方信息工程学院,西安,710025
2. 西安理工大学,材料科学与工程学院,西安,710048
摘    要:针对钢管油气输送过程中硫腐蚀严重的现象,重点讨论了硫离子体积分数以及温度对输油气钢管腐蚀性的影响,研究了采用两种不同焊丝焊接的X80管线钢焊缝的腐蚀趋势、腐蚀速率及表面腐蚀形貌,揭示了X80管线钢焊接接头耐硫腐蚀的特性及耐蚀机理。研究结果表明,随着温度的升高和体积分数的增大,采用H05MnN iMo焊丝比采用H06H1焊丝焊接的焊缝耐蚀性好。

关 键 词:X80管线钢  焊缝  含硫介质  耐蚀性

Research on the Corrosion Restistance of X80 Pipeline Steel Welding Joints in Sulfer-containing Medium
WANG Na,LEI A-li.Research on the Corrosion Restistance of X80 Pipeline Steel Welding Joints in Sulfer-containing Medium[J].Welded Pipe and Tube,2010,33(5):24-29.
Authors:WANG Na  LEI A-li
Affiliation:1.Xi'an Technological University North Institute of Information Engineering,Xi'an 710025,China;2.School of Materials Science and Engineering,Xi'an University of Technology,Xi'an 710048,China)
Abstract:Aiming at serious sulfur corrosion during transporting oil and gas,the effect on transporting oil and gas steel pipe corrosives of sulfur concentration and temperature was discussed,and corrosion tendency,corrosion rate,surface corrosion profile were researched of X80 pipeline steel weld processed by adopting two different wires,as well as,corrosion resistance identity and corrosion mechanism of X80 grade pipeline steel welding joints were disclosured.The research results indicated that corrosion resistance of weld processed adopting H05MnNiMo wire is better than that of adopting H06H1 wire.
Keywords:X80 pipeline steel  weld  sulfur-containing medium  corrosion restistance
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号