| 热轧高强度钢板剪切开裂原因 |
| |
| 引用本文： | 田正宏,田青超,冯长宝,施春月,胡会军,职建军,王洪兵.热轧高强度钢板剪切开裂原因[J].理化检验(物理分册),2008,44(10):571-574,578. |
| |
| 作者姓名： | 田正宏 田青超 冯长宝 施春月 胡会军 职建军 王洪兵 |
| |
| 作者单位： | 宝山钢铁股份有限公司,上海201900 |
| |
| 摘 要： | 采用化学成分分析、宏观和微观检验及试验验证等方法对某热轧高强度钢板剪切开裂原因进行了研究。结果表明：这种开裂并非由于连铸坯中心裂纹或偏析所造成的，而是中心马氏体带和基体上弥散分布较大的TiN（C）颗粒和晶界上富集的磷以及剪切加工工艺不合理所造成；并提出相应措施，解决了这一问题。
|
| 关 键 词： | 分层 剪切开裂 高强度钢板 |
SHEAR CRACKING REASON OF HOT ROLLED HIGH STRENGTH PLATE |
| |
| TIAN Zheng-hong,TIAN Qing-chao,FENG Chang-bao,SHI Chun-yue,HU Hui-jun,ZHI Jian-jun,WANG Hong-bing.SHEAR CRACKING REASON OF HOT ROLLED HIGH STRENGTH PLATE[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2008,44(10):571-574,578. |
| |
| Authors: | TIAN Zheng-hong TIAN Qing-chao FENG Chang-bao SHI Chun-yue HU Hui-jun ZHI Jian-jun WANG Hong-bing |
| |
| Affiliation: | (Baosteel Co. Ltd. , Shanghai 201900, China) |
| |
| Abstract: | The forming mechanism of shear cracking in HR plate with high strength was researched. The crack obviously differed from delamination which was derived from center-crack and segregation in slab. Intrinsic factors resulting in shear cracking were martensite band structure, biggish grains of TiN（C）dispersed in base structure and phosphor segregating near crystal border. Extrinsic factor resulting in shear cracking was improper cutting technics. Some effective measures were proposed to prevent the defect. |
| |
| Keywords: | delamination shear cracking high strength steel plate |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
