首页 | 本学科首页   官方微博 | 高级检索  
     

原位AgX对亲水型光敏热成像(PTG)材料感光性能和稳定性的影响
引用本文:林海莉,曹静,李金培. 原位AgX对亲水型光敏热成像(PTG)材料感光性能和稳定性的影响[J]. 影像技术, 2008, 20(5): 15-17
作者姓名:林海莉  曹静  李金培
作者单位:1. 淮北煤炭师范学院的,化学系,淮北,235000
2. 中国科学院,理化技术研究所,北京,100080
基金项目:国家自然科学基金,安徽省教育厅自然科学基金,安徽省高校青年教师科研项目
摘    要:分别研究了原位AgBr和AgI对亲水性PTG材料的感光性能以及热加工后光稳定性的影响。结果表明,AgBr与硬脂酸银(AgSt)的摩尔比为0.01:1时,PTG材料可取得最大感光度,对于AgI可取得相似的结果。未曝光PTG样片经热显影后,在室内光照条件下产生灰雾的程度不同。含有原位AgI的PTG样片的灰雾增长约0.10左右,而含有原位AgBr的PTG样片灰雾增长约0.20左右。

关 键 词:原位AgX  光敏热成像(PTG)  感光性能  稳定性

Effect of In-situ AgX on the Photographic Property and Stability of Hydrophilic PTG Materials
LIN Hai-li,CAO Jing,LI Jin-pei. Effect of In-situ AgX on the Photographic Property and Stability of Hydrophilic PTG Materials[J]. Image Technology, 2008, 20(5): 15-17
Authors:LIN Hai-li  CAO Jing  LI Jin-pei
Affiliation:LIN Hai-li,CAO Jing,LI Jin-pei (1.Department of Chemistry,Huaibei Coal Industry Teachers College,Huaibei 235000; 2.Technical Institute of Physics and Chemistry,CAS,Beijing 100080)
Abstract:The effect of in-situ AgBr and materials and the light stability of thermally AgI on the photographic property of hydrophilic PTG processed ones were respectively studied.The results showed that when the molar ratio of AgBr to silver stearate (AgSt)was 0.01:1,the maximal sensitivity of PTG materials could be obtained,as well as to AgI.When unexposed PTG materials with in-situ AgBr and AgI were thermally processed,different fogs of PTG materials were formed under room light illumination.The increment in fogs of PTG materials with in-situ AgI was about 0.10 whereas that of PTG materials with in-situ AgBr was approximate 0.20.
Keywords:in-situ AgX  PTG  photographic property  stability
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号