| 高速走丝电火花线切割机床电极丝恒张力控制器的研究 |
| |
| 引用本文： | 戴庭风 罗纪嵘. 高速走丝电火花线切割机床电极丝恒张力控制器的研究[J]. 安徽工学院学报, 1991, 10(1): 31-36 |
| |
| 作者姓名： | 戴庭风 罗纪嵘 |
| |
| 作者单位： | 安徽工学院机械制造工程系，安徽工学院机械制造工程系，安徽工学院机械制造工程系，安徽工学院机械制造工程系 |
| |
| 摘 要： | 本文介绍了新研制的WEDM电极丝恒张力控制器’作为机床附件,配置在高速走丝线切割机床上,用来上丝并使丝张紧。经工艺试验和工厂使用证明,采用本恒张力控制器切割工件,有效地改善了表面质量,提高了加工精度和生产率。
|
| 关 键 词： | 高速走丝 线切割机床 WEDM 电火花 |
CONSTANT-TENSION CONTROLLER FOR WIRE-CUT ELECTRIC DISCHARGE MACHINE WITH HIGH TRAVELLING SPEED(WEDM-HS) |
| |
| Dai Tingfeng,Lou Jiyong,Xing Tingyuan,Yang Huifen. CONSTANT-TENSION CONTROLLER FOR WIRE-CUT ELECTRIC DISCHARGE MACHINE WITH HIGH TRAVELLING SPEED(WEDM-HS)[J]. , 1991, 10(1): 31-36 |
| |
| Authors: | Dai Tingfeng Lou Jiyong Xing Tingyuan Yang Huifen |
| |
| Affiliation: | Dai Tingfeng;Lou Jiyong;Xing Tingyuan;Yang Huifen Department of Machinery Engineering |
| |
| Abstract: | In this article, the authors presented a new developed constat-tension controller for wire electrode on WEDM-HS. The controller which isused for an accessory is equipped on WEDM-HS to set up the wire electrode andto keep it tight. The resut of test shows that that surface quality of workpiece can be impro-ved and machining precision and hroductivity incread. |
| |
| Keywords: | high travelling speed wire-cut electric discharge machine (WEDM-HS) wire electrode |
| 本文献已被 CNKI 维普 等数据库收录！ |
